Best Adjustable Depth Step Drill Bit

DKIBBITH Pcs M2 Countersink Drill Bit Set, 3in1 Wood Pilot Countersink Drill Bits Drilling #4#6#8#10#12 Screws Holes, with Adjustable Depth Stop, Quick Release Hex Shank, 2-Allen Wrench

  • ... Meet All the Needs – with popular 82 Degrees Countersink and 3/8” Counterbore Bits - You can either have the head of the screw below the surface then conceal it with matching wood plugs, or fit flush with the surface.
  • Cutting Depth Adjustable – You may need holes for long or short screws.
  • these counterbore Drill Bits with Adjustable Depth Stop to fit the length of your screws.
  • just tighten the pilot drill bit with the hex key (included) to the Countersink / Counterbore sleeve.
  • Fit Most Tools – 1/4" hex shank design compatible with most quick-change chuck machines or power drills.
  • Includes 7 pieces of Drill/Countersink/Counterbore 3in1 bits in sizes 5/64”, 3/32”, 7/64”, 1/8”, 1/8”, 9/64” 9/64”。.
  • For Hardwood & Softwood - The HSS M2 Grade countersink drill bit perform well in softwood or hardwood and serve the needs of most woodworkers.
  • when drilling softwood, please use the one size smaller bit.
Check Stock

28 Pack Woodworking Chamfer Drilling Tools with a Case Rocaris Including 6 Countersink Drill Bits Set 5 Metric Step Drill Bit 7 Counter Sinker Drill Bit Set with L-Wrench 8 Wood Plug Cutter.

  • 7 Pack Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8 Pack 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6 Pack 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steel, they are pectect for sinking 90° hole in Wood and PVC board for ountersunk screw. Diameter- 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

Adjustable Countersink Drill Bit, Self-Adjusting Depth Control Without Wrench, Preventing Scratches Or Marks by Stopper Mounted Bearing, Tungsten Carbide Tipped Counterbore - 1/8\x5/16\(3x8mm)

  • 【Depth adjustment does not require a wrench】 - It is an easy, quick and accurate tool to adjust the depth by turning the knurl by hand without a wrench. We made these woodworking tools in Korea.
  • Ezenkorea adjustable depth countersink drill bit. And we have gotten a patent in five countries.
  • the United States, Korea, Japan, China, and Taiwan..
  • 【To Prevent Scratches On The Surface】 - After processing the wooden hole, Ezen countersink bit only goes into a predetermined depth, so anyone can work stably. In addition, even if the drill continues to spin, the built-in stopper does not turn, thereby preventing scratches on the wood surface. This ezen countersink adjustable drill bit is the best product to drill diagonal and straight lines..
  • 【Quick Set Up The Wood Working Depth】 - Depending on the finishing depth of the screw work and the thickness of the wood, you can set the work depth as fast as desired. The hole depth of wood can be kept constant. This is an advantage of our product that cannot be found in other wood working tools and equipment..
  • 【Replaceable Center Bit And Body】 - To replace the countersink body or to reassemble the product after disassembling, rotate the retaining ring and connect it to the body. Then rotate until the marke....
Check Stock

Craftsman 25B-E30-793 30cc 4-Cycle Gas Powered Lawn Edger, Liberty Red

  • POWERFUL AND QUIET: 30cc, 4-cycle engine is cleaner and produces less noise. NO MIXING: 4-cycle advantage means no mixing of gas and oil.
  • ADVANCED 2-STEP STARTING: 2-Step starting simplifies starting to just prime and pull. FULL-CRANK ENGINE: More power and less vibration.
  • ELECTRIC-START CAPABLE: Eliminates manual pull starts with an electric start drill bit (Drill Bit & Drill Sold Separately). 9-INCH, DUAL-TIPPED STEEL BLADE: Cuts a clean edge along driveways and sidewalks, edging with a 1.75 in. max depth.
  • GREATER CONTROL: Fully molded ergonomic handle design with handle-mounted throttle and idle controls for easy operation.
  • EASY TRANSPORT: 3 premium transport wheels for added stability and control.
Check Stock

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

  • HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
  • STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
  • 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
  • 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

SaferCCTV Woodworker 3/4 Inch Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set for Construction Installation Renovation Decoration Industry

  • CENTER DRILL BIT: The 7pcs self-centering drill bit made of high-speed steel drill bit & quenching treatment shell designed. Adjustable drill depth, high hardness, rustproof, durable and superior drilling performance.
  • EXCELLENT DESIGN: The center drill set features self-centering to reduce bit walking increases precision and efficiency when drilling. Double-sided hole design - fast & automatic discharge Sawdust from the hole on both sides, without a drill, blocked.
  • DIFFERENT SIZE: Hinge drill bit comes with 7 different sizes: 5/64.
Check Stock

29-Pack Woodworking Chamfer Drilling Tools WENHUALI 6 Countersink Drill Bits 7 Counter Sinker Drill Bit 8 Wood Plug Cutter 3 Step Drill Bits and 3 Countersink Drill Bit with 1pcs Center Punch.

  • ...7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6Pcs 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steels, they're pectect for sinking 90° holes into Wood and PVC boards for ountersunk screws and fixings. 6 different diameter: 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

Neiko 10193A Titanium Step Bits Unibit Set 28 Sizes High Speed Steel Standard SAE Step Drill Bit Set Step Bits for Metal Unibit Step Drill Bits Industrial Unibit

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits allowing for you to spend more time working, than swapping out drill bits..
  • TITANIUM COATED HSS UNIBIT: Made of high-speed steel with titanium coating for added durability and bit life. Suitable to drill though plastic, aluminum, copper, stainless steel, and many other types of sheet metal..
  • SMOOTH DRILLING ACTION: Two-flute spiral design provides faster, smoother cutting without walking and a tri-flat shank to ensure a firm grip. Our titanium 2 step bits for metal are perfect for all your DIY, general building, and engineering tasks..
  • COMPLETE STEP DRILL BIT SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • STEP BIT SET CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill. Our unibit step drill bit is compatible with most drills on the market..
Check Stock