Best Adc Dac Inputs

USB C DAC-USB C Headphone Adapter-Portable 32 Bit Headphone Amplifier-Type C to 3.5mm Jack Adapter-Premium Sound Enhancer for Google Pixel 3 4XL Samsung Galaxy S20 Note 10 10+(USB Type C)

  • Premium Quality DAC Dongle- Built in a USB Audio Class 2.0 DAC Realtek‘s High Definition Audio Codecs,ADC support two channels mic mix input.
  • HI-RES GOOD SOUND - the higher sampling rate 384kHz/32bit results in better restoration of the original virtual signal, further improved sound quality, and listening to high quality music anytime and anywhere. more accurately restore the original sound performance of the studio..
  • USB C Headphone DAC Adapter - TRRS 3.5 to usb c DAC upgrade the record sample rate to 48khz/16bit two channels mix input，High Definition Audio lossless output，provides dynamic adaptive adjustment, easy to promote HiFi headphones, stereo earbuds up to 35mW 32Ohm. enjoyment of the On-The-Go headphones dac dongle..
  • USB C Earbuds Aux Adapter with mic - Built with high-quality materials to ensure superior durability， Compact size and Minimalist design: weighing only 0.14 oz, easy to carry， 0.5mm longer than normal, be effectively match a mobile phone with a protective case.
  • Wide Compatibility - Works with a wide range of USB-C (Thunderbolt 3) iPad Pro MacBooks android devices Xbox PS5 game consloes and even Windows 10 laptops chromebook.
Check Stock

HT OMEGA Claro Halo PCI Sound Card

  • Built in 120db TI headphone amp supports up to 600ohm with selectable impedance levels.
  • onboard CD digital in, coaxial in/out requires 2pin (CA1) cable.
  • Front panel audio support with auto mute feature: 10 pin (AC97 compatible).
Check Stock

MOTU M2 2x2 USB-C Audio Interface

  • ...ra DAC Technology found in audio interfaces costing thousands, the M2 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.
  • Best-in-class Speed: The M2 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).
  • Best Metering: When recording and mixing, nothing is more critical than achieving optimum levels. The M2 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.
  • Live Streaming Loopback: The M2 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the M2 in your host software for live streaming or podcasting.....
Check Stock

Monolith Liquid Gold Balanced Headphone Amplifier & DAC by Alex Cavalli, Solid State Amp, AKM AK4493EQ DAC, Balanced & Single-Ended Headphone Outputs

  • ...oad. The amplifier is microprocessor controlled using precision A-to-D and D-to-A conversions to manage and monitor the runtime behavior of all critical aspects of the circuitry..
  • AKM AK4493EQ DAC: Detailed sound. Exceptional musicality. The AKM AK4493 is AKM's new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a Direct Stream Digital (DSD) input of 2.8/5.6/11.2 (maximum) MHz, the industry's highest level. An internal circuit employs a newly developed 32-bit digital filter for the ultimate in sound quality and musicality..
  • Balanced and Single-Ended Headphone Outputs: With multiple inputs and outputs for balanced and single-ended operation and easy front panel input selection, the Liquid Gold X is compatible with just about everything..
  • Versatile Inputs: Digital or Analog — We've Got You Covered: The Liquid Gold X amplifier features both single-ended and balanced analog inputs, as well as USB, Coaxial, and Optical digital inputs to support all your connectivity needs..
  • 4x and 6x gain settings and an approximate full output power of 3.6 watts per channel into a 50-ohm load..
Check Stock

Harmony Audio Mini ANL MIDI 4-Way Fused Distribution Block with Fuses

  • 2.54mm/0.1in pin pitch for friendly test MCU development board..
  • Widely used in ADC/DAC/operational amplifier RS232, RS485, RS422 bus..
  • This is a DC‑DC voltage converter module with widely compatible..
  • Made of premium ABS material, this step up module has long service life..
  • The terminals have high electrical conductivity, good stability and more practical..
Check Stock

Emerson 24A34-5 Electric Heat Sequencer, 3 Switches

  • +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations..
  • Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity..
  • 3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms..
  • Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB..
  • 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker. . . )..
Check Stock

Monolith 124460 Portable Headphone Amplifier and Dac - Black with THX AAA Technology Analog Input Slim Design Dirac Sensaround

  • The world's most linear amplifier technology. The THX achromatic audio amplifier (THX aiaa) ensures the ultimate no-compromise Headphone audio....
  • Akm 4493 DAC detailed sound. Exceptional musicality. The AKM AK4493 is akm's new flagship 32-bit stereo Premium DAC. It supports PCM inputs up to....
  • Dirac sensaround expand your headspace. Music is usually mixed with loudspeakers in mind, Not headphones. As a result, Headphone listening is often....
  • Versatile inputs digital or analog - We've got you covered. This amplifier features a USB and a 3.5mm Optical input, as well as an analog 3.5mm stereo....
  • Dynamic range control: Use the DRC functionality to set the shelving Filters. The DRC starts with low-pass and high-pass Filters to split the low and....
Check Stock

XYGStudy for Raspberry Pi 4B/3B+/3B/2B/B+/A+ Jetson Nano High-Precision AD/DA Expansion Board Sheild Onboard ADS1256 DAC8552 ADC DAC Jumper

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate. Onboard DAC8552, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal. Onboard input/output interface via screw terminals, for connecting analog/digital signal. Features AD/DA detect circuit, easy for signal demonstration.
Check Stock

Digital Microphone Amplifier, Reverberation Board Low Noise for Audio Equipments

  • For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples..
  • Cond over I2C,The chip can be configured as 4 single-ended input channels, or two differential channels..
  • As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range..
  • We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter..
  • The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed , you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs..
Check Stock