Best Acrylic Thermoplastic Solvent Base

EnduraSeal 100% Acrylic'Wet Look' Semi Gloss Concrete Sealer Solvent Base - 5 Gallon

100% pure acrylic, high performance lower odor solvent sealer.
Produces a semi gloss "Wet Look" to just about any type of subtrate.
Highly durable for a fraction of the cost of Urethane & Epoxy sealers..
Non-yellowing formula (Doesn't yellow the surface in time).
Lower odor than most solvent based sealers on the market.

GC America 900820 StickNET Fiber Reinforcements, 4 cm x 15 cm Bundles

Stick fibers are dry and they should be wetted with a light-curing resin or a heat/cold curing acrylic depending on the indication stick fibers have a porous thermoplastic polymer matrix.
EverStick fibers are pre-wetted and ready to use, they are impregnated with thermoplastic polymer.

GC America 900834 everStickCandB Fiber Reinforcements, 1 cm x 8 cm Bundles

Stick fibers are dry and they should be wetted with a light-curing resin or a heat/cold curing acrylic depending on the indication stick fibers have a porous thermoplastic polymer matrix.
EverStick fibers are pre-wetted and ready to use, they are impregnated with thermoplastic polymer.
For surface retained, inlay and onlay bridges.

GC America 900833 everStickCandB Fiber Reinforcements, 2 cm x 12 cm Bundles

Stick fibers are dry and they should be wetted with a light-curing resin or a heat/cold curing acrylic depending on the indication stick fibers have a porous thermoplastic polymer matrix.
EverStick fibers are pre-wetted and ready to use, they are impregnated with thermoplastic polymer.
For surface retained, inlay and onlay bridges.

SCIGRIP Weld-On #4 Adhesive (4 oz.)

SCIGRIP 4 is formulated as a blush-resistant cement for bonding acrylic to itself..
2 Years Shelf Life, 1-2 Min Working Time, 3 Min Fix Time. UN 1992, PG II.
Used in applications like display and presentation case fabrication and medical equipment assembly..
Less likely to leave white marks (commonly called blushing.).
Used in the manufacture of numerous solvent welded structures and subassemblies using the capillary method..

50ml All-Glass Syringe Injector for Printer Ink Cartridge Refilling for Roland Mimaki Mutoh Printers

High quality Syringe Glass 50ml for Refilling Cartridges Solvent ink Wide Format Printers.
Solvent Resistant for refilling solvent ink, also good for water base ink.
This syringe air is tight and hold thin liquid good..
Used for All Roland, Mimaki, Mutoh printers.

EDOG Mossberg 500 Shotgun Schematic (Exploded View) 14x48 Padded Gun Work Surface Protector Mat

E.D.O.G. Cerus Gear Magnum Size Mossberg 500 (Exploded View) Schematic Cleaning Mat Only.
Mossberg 500 14" X 48" Magnum Size E.D.O.G. Cerus Gear Schematic Promat | Protect Your Firearm And Work Surface | Non – Slip Base | Solvent & Oil Resistant Rolls Up For Easy Storage | Hand Washa| ble –.
Mossberg 500 PROMAT Rolls Up For Easy Storage | Hand Washable –.
Protect Your Firearm And Work Surface | Non – Slip Base.

Brady SPC BPO500 15\ x 17\ Light Weight Economical Oil Only Absorbent Pads - 100 ct

Application(s) is chemical resistant sorbent for oil and solvent base liquids.
Provide users with a durable absorbent for cleaning up petroleum based spills and leaks.
These sorbents have proven to absorb liquids and repel water, and is effective in both industrial and environmental applications.
This chemical resistant sorbent for oil and solvent base liquids is best applied during emergency spills for fast and easy clean up.

UCHIDA 522-C-27 Marvy Fine Point Fabric Marker, Khaki

High-covering, premium acrylic-based pigment paint in an easy-to-handle marker that works on almost every surface, both indoors and outdoors.
Flowmaster pump marker system has patented capillary technology.
Acrylic-based hybrid paint is UV and weather-resistant for highest opacity.
Solvent-free and dilutable with water or acetone.
Tips are exchangeable and marker is refillable.