Best Acq Treated Product

OZCO 51768 Ironwood 4-inch Flush Inside 45-degree Angle Bracket, (4 per Pack), Black

  • Kit Includes: 4 Flush Inside 45-degree Plates.
  • Includes: 24 OWT-Lock #12 by 1-1/4-inch Hex HD Sharp Point (1/4-inch Hex).
  • Material constructed of pre-galvanized steel with a black powder coated finish.
  • Approved for use with ACQ Treated Lumber​.
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

  • For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
  • 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

#15 x 4\ Construction Lag Screw Stainless Steel T-30 Torx/Star Drive Heavy Duty Stainless Steel Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Best Screw for Maximum Corrosion Protection, High Quality Heat Treated Stainless Steel Grade 300 Series.
  • For use with chemically treated materials (ACQ) High Weather Exposure and High Moisture Areas.
  • Not For Applications With Direct and Continual Exposure to Salt Water.
  • Quality Wood Screw Thread Require Less Driving Torque And Provides Maximum Holding Power.
  • For construction applications as Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam.
Check Stock

The Hillman Group 48272 8 X 1-3/4-Inch Flat Head Square Drive Deck Screw Brown 500-Pack,Ceramic

  • Green hue to complement your decking finish.
  • Ceramic coating provides superior rust and corrosion protection.
  • Type 17 point and flat head eliminate predrilling and will lay flat with your decking.
  • Square drive for confident stick fit while driving.
  • For use in all woods: cedar, redwood, pressure treated wood (ACQ, CA, and CCA recommended).
Check Stock

OZCO 56637 Laredo Sunset 8-inch Post to Beam Bolt Inline Connector, (2 per Pack)

  • (4) 2-3/4-inch OWT Timber Screws for bottom hole placement only.
  • Four OWT Timber Bolts are required and sold separately.
  • Approved for use with ACQ treated lumber.
  • Rest the heavy beam on the ledge while you secure the bolts.
  • Material constructed of 3/16-inch galvanized steel with a beautiful black powder coated finish.
  • Recommended for roofs, larger pavilions, pergolas and rafters.
Check Stock

Paslode Framing Nails 650385 HDG 30 Degree Round Head 3 inch x .120 Gauge 2,000 per Box

  • Efficiency - 10% more nails per collated strip means less reloading.
  • Durability - Offers high corrosion resistance in LVL, including ACQ and MCQ.
  • Low Maintenance - Polymer coating on round nailhead reduces staining and streaking by 80% compared to traditional Hot Dipped Galvanized framing nails.
  • Increased Productivity - Paper tape collation means no job site debris to clean up.
  • Expert Approval - IRC R319.3 code approved for use in pressure-treated lumber in accordance with ASTM A 154.
Check Stock

Lg ACQ87420613 Refrigerator Dispenser Front Panel Assembly Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • 79551833413,79551833412,79551833411,79551833410.
  • Dispenser front panel assembly ACQ87420613 includes the housing and control panel for the ice and water dispenser.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore.
  • This dispenser front panel assembly (part number ACQ87420613) is for refrigerators.
  • Dispenser front panel assembly ACQ87420613 includes multiple parts.
  • refer to your parts diagram for a complete list of parts included.
Check Stock