Best Accuracy Class 1 0

Steampunk Control Panel - Design 1 - Wall Decal 16' wide x 23' tall

  • Mount Size: 37 x 37mm/ 1.5" x 1.5" (L*W).
Check Stock

Poniie PN2000 Plug-in Kilowatt Electricity Usage Monitor Electrical Power Consumption Watt Meter Tester w/Extension Cord

  • HIGH POWER WATT METER: Counts consumption by Kilowatt-hours, with high-power tolerance rated at Max.16A, compatible with 220v ac.
  • REFINED ACCURACY: Built-in high precision current sensor. Ensures you the best accuracy-Class 1.0 with 0.01W, 0.01V and 0.001A resolution.
  • BACK-LIGHT & MEMORY: With wide view angle, clear backlight large LCD Display and hold over circuit memory for cumulative kilowatt-hours.
  • PROFESSIONAL KILOWATT METER: Start detection 0.20W, you can virtually monitor standby or working power dissipation of all your electronics.
  • BUY WITH CONFIDENCE: 1-YEAR Warranty by Poniie.
  • full ABS fire retardant material housing and comes with 14AWG heavy duty extension cord.
Check Stock

Fluke 718-300G Pressure Calibrator, -12 PSI to 300 PSI Range

  • Measure pressure and vacuum to 0.05% of full scale with internal 30 or 100 psig sensor.
  • Compatible with non-corrosive gasses and liquids.
  • Measure pressure to 10,000 psi/69 mPa using one of 29 Fluke 700Pxx Pressure Modules.
  • Measure mA with 0.025% accuracy and 0.001 mA resolution, while providing 24 volt loop power.
  • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device.
  • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field.
  • Error-Percent calculation for quicker pass/fail decision making in the field.
  • Best in class mA accuracy of 0.015-Percent for better measurement confidence and workload coverage.
  • Min/Max/Hold to capture changing measurements.
Check Stock

Baomain DDS238-4 (30-100)Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

Etekcity Infrared Thermometer 774 (Not for Human) and Meat Thermometer Black

  • NOT FOR HUMAN: Temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct. Class 2 laser, optical power 0.5-0.9mW.
  • BETTER ACCURACY: 12: 1 D:S, meaning it can accurately measure targets at greater distances compared to most others.
  • For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36 cm).
  • TARGET QUICKER: Measure surface temperature ranging from -58℉ to 716℉(-50℃ to 380℃), you can choose the unit from ℉ to ℃.
  • A built in laser gives you the precision to hone in on the exact space you want to measure.
  • ADDED FUNCTIONS: The LCD screen is backlit, also has an auto-off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included).
  • Rapid Results: Get temperature readings in as little as 2-4 seconds..
  • Accurate Readings: Enjoy accurate measurements with a temperature range of -58°–572°F / -50°–300°C. ±1℃ accuracy from-4°F-302°F/-20°C to 150°C..
  • Clear Display: The large 3x1.4cm backlit LCD display provides crisp and clear results..
  • Safe Measurements: The long temperature probe makes measuring safe and easy..
Check Stock

Etekcity Infrared Thermometer 774 (Not for Human) and Meat Thermometer Red

  • NOT FOR HUMAN: Temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct. Class 2 laser, optical power 0.5-0.9mW.
  • BETTER ACCURACY: 12: 1 D:S, meaning it can accurately measure targets at greater distances compared to most others.
  • For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36 cm).
  • TARGET QUICKER: Measure surface temperature ranging from -58℉ to 716℉(-50℃ to 380℃), you can choose the unit from ℉ to ℃.
  • A built in laser gives you the precision to hone in on the exact space you want to measure.
  • ADDED FUNCTIONS: The LCD screen is backlit, also has an auto-off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included).
  • Rapid Results: Get temperature readings in as little as 2-4 seconds..
  • Accurate Readings: Enjoy accurate measurements with a temperature range of -58°–572°F / -50°–300°C. ±1℃ accuracy from-4°F-302°F/-20°C to 150°C..
  • Clear Display: The large 3x1.4cm backlit LCD display provides crisp and clear results..
  • Safe Measurements: The long temperature probe makes measuring safe and easy..
Check Stock

Leica DISTO D2 New 330ft Laser Distance Measure with Bluetooth 4.0, Black/Red

  • This unit contains a Class II Laser with 1mW output.
  • 1/16″ accuracy and up to 330 foot measuring range. Measuring units-0.000 m, 0.00 ft, 0’00” 1/16, 0 in 1/16. Measurements per set of batteries-up to 10000.
  • Bluetooth 4.0 for transferring measurements into desired software.
  • Last 10 measurement memory, Dimensions : 116 x 44 x 26 mm / 4.57 x 1.73 x 1.02 in.
  • Pythagoras function for indirect height or width measurements.Operating temperature range:14°F to 122°F / -10°C to 50°C.
  • Intelligent automatic end piece for hard to reach corners.
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock