Best Ac Motor Speed

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....

Check Stock

AC High Torque Motor,90W AC Gear Motor Electric Single-Phase Motor Reversible Motor with Variable Speed Adjustable Controller Governor Geared Motor 110V 1:10 135RPM

★【STABLE OPERATION】- This is a geared AC motor with a working voltage of AC 110V.Less noise, stronger. Its stability is strong, the use is more assured, also has the governor, the use can be more convenient..
★【PREMIUM MATERIAL】- The motor can achieve super fast speed of 135 RPM, thus ensuring high efficiency.And the motor has the characteristics of heat resistance, low noise, high quality and long service life..
★【SPEED CONTROLLER】- The geared AC motor also has a reduction gear box and a governor, the speed regulator has a large torque, with a variety of optional speeds. Adjust different speed according to different products to achieve the desired effect..
★【WIDELY USED】- Widely used in packaging, printing, textile, dyeing, chemical, food, medical, pharmaceutical construction machineries. And advertising, office, petrochemical, instrumentation, stage lighting, transmission, automatic warehouse, parking access control system and other equipments..
★【PREMIUM CUSTOMER SERVICE】- Please feel free to contact us if you have any questions using our products, Our professional team will provide you with the perfect service..

Check Stock

FireplaceBlowersOnline AC Motor Rheostat Variable Speed Control for Fireplace Blowers and Fan Kits | Full Range RPM Speed Adjustment with ON and OFF Positions

AC Motor Fan Speed Control, 115 VAC 50/60 Hz, 2.5 AMP, On/Off Positions.
Includes pig tail leads with fast on connectors.
Provides infinitely variable speed motor control for Shaded Pole, Permanent Split Capacitor and Universal (AC/DC) motors.
The variable speed motor control contains an on/off line switch, a high gain RFI noise suppression filter, an adjustable trimpot to set the minimum speed and a flame retardant ABS enclosure..
Applications include Fireplace Blowers, Fans and Shaded Pole Motors.

Check Stock

Gear Motor with Speed Controller AC110V 6W Electric Single-Phase Motor 1500PRM Variable Speed Reduction Gear Reducer Motor with High Torque (Reduction Ratio: 1:50)

【STABLE OPERATION】The 6W geared motor can reach the speed of 27RPM, thus ensuring stable operation. The motor has low noise, long service life and flexible installation..
【SPEED CONTROLLER】The single-phase motor also has a reduction gear box and a governor. The governor has a large torque and a variety of optional speeds. You can adjust the speed according to different products to achieve the desired effect..
【MAIN PARAMETER】Rated voltage: AC110 V.
6W geared motor：88 * 60 * 50mm / 3.4 x 2.3 x 1.9in (Appr.).
Reducer size: 43 * 60 * 50mm / 1.7 x 2.3 x 1.9in (Appr.).
【WIDE APPLICATION】The geared AC motor has a built-in precision stator and pure copper coil, which is stable, reliable and fast in heat dissipation. It is widely used in packaging, printing, textile, food, construction machinery and other industries..
【GUARANTEE】We are committed to providing you with high-quality customer service, please tell us if you receive our product with any unpleasure, we will try our best to help you as soon as we could..

Check Stock

LEDMOMO 1203BB 6V 12V 3A 80W DC Motor Speed Controller (PWM) Adjustable Motor Driver Switch

1203BB DC Motor Speed Controller regulate the speed of the motor by adjusting Pulse-Width Modulation (PWM)..
Working Voltage: DC 6-24V. Maximum continuous output current : 3A. Maximum output power: 80W..
The Motor Speed Controller built-in switch. You can control the forward direction and the stop of DC motor by the switch..
The circuit built-in a 3A fuse. Make the use of this motor safer..
Note! DC motor speed controller is connected to DC power supply. Never connect directly to household 220V AC power supply..

Check Stock

HVAC Blower Motor Resistor AC Blower Control Module Fits 2009-2017 Ford Expedition 2009-2014 Ford F150 2009-2017 Lincoln Navigator Replace BL3Z-19E624-A BL3Z19E624A YH-1829 YH1829

【REPLACeMENT BLOWER MOTOR RESISTOR】The AC Blower Motor Resistor controls the fan speed in your AC and heating system. If you can no longer adjust the air speed with your AC controls or your AC system no longer blows, chances are you need a new Blower Motor Resistor. It will Effectively return your vehicle's heating and cooling system to its original peak performance. The long-lasting design resists thermal fuse failure, overheating, and burnout.
【EASY INSTALLATION】Direct replace your original HVAC Fan Blower Motor Resistor and easy installation. The Blower Motor Resistor is located on lower passenger side dash and it can accessible by removing a few screws. Simply remove the screws that secure the blower motor resistor into the blower, remove the resistor assembly, and install the new resistor in place.
【REPLACES PART NUMBER】BL3Z-19E624-A, BL3Z19E624A, YH-1829, YH1829.
【FITS THE FOLLOWING VEHICLES】Fits 2009-2017 Ford Expedition, 2009-2014 Ford F150, 2009-2017 Lincoln Navigator. NOTE: Only fits models with Automatic AC controls.
【BUY WITH CONFIDENCE】 Order from YUTOCOOL, we offer 12 Months warranty, true worry-free shopping experience. Every product must take inspected and tested multiple times before the shipment.

Check Stock

Variable Speed Electric Gear Motor, AC110V 15W 5K High Torque Single-Phase Gear Reduction Motor 270 RPM/min with Speed Controller

【Main Parameters】- Name: Geared ac motor.
15W Gear Motor: 70mm*70mm*134mm, Axis Length 30mm.
【Wide Applications】- This gear reducer motor is widely used in packaging, printing, textile, dyeing, chemical, food, construction industries. Suitable for advertising, office, instrumentation, stage lighting, automatic warehouse, parking access control system and other equipments..
【Note】- Speed ratio 1:5(270 rpm/min), gearbox without gearbox is 1350 rpm/min.【Warm Tips】Based on the industrial standard, to meet different needs of customers, our motor does not include the power cord, you need to purchase the power cord to connect..
【100% Customer Guarantee】- Our products are shipped from US warehouses, we will ship your order asap through logistics such as UPS/USPS/FedEx. If you have any problems, please feel free to contact us. We will try our best to solve your problem..

Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.

Check Stock

DEWALT Die Grinder, 1-1/2-Inch (DWE4887)

4.2 amp, 25,000 rpm motor of the die grinder provides high power and speed for all 1-1/2-inch grinding applications.
AC/DC capacity pf the electric die grinder works off welding machines and generators for increased productivity and versatility.
DEWALT die grinder has a convenient paddle switch with lock-on button for easy gripping.
Precision 1/4-inch collet securely holds all proper accessories (1/8-inch reducing sleeve as optional accessory).
4.2 Amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications.
AC/DC capacity works off welding machines and generators.
Paddle switch with lock-on button for easy gripping.
Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory).

Check Stock