Best Ac Line Fittings

Lisle 37140 Disconnect Pliers, 45 Degree

The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.

Check Stock

IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch

【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..

Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.

Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
{Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....

Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..

Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

{Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
{Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
{Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
{Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
{Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.

Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock

Senville 16 Ft Insulated Copper Line Set for Mini Split Air Conditioner 3/8 & 5/8 OD White

16 Ft. Insulated Standard Quality 3/8" & 5/8" OD.
Pre-Flared Fittings. Total Length 16 Ft..
Suitable for Senville Mini Split Air Conditioners, the Trusted Mini Split AC Brand..
Important Note: Please Verify Line Set Requirements with Your Mini Split Air Conditioners Manufacturer Equipment Sheet Data..

Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock