Best 915mhz Magnetron

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.

Intel D915GAG Socket 775 mATX Motherboard General Features: Intel 915G chipset mATX Form Factor.
Socket 775 533/800 MHz Front Side Bus (FSB) Supports up to 4 GB DDR Non-ECC RAM (DDR333/DDR400).
Intel Graphics Media Accelerator 900 Intel High Definition integrated audio Integrated 10/100 LAN.
One (1) UDMA/33/66/100 IDE controller One (1) floppy disk controller Four (4) SATA/150 ports.

Microwave Magnetron 2M246 050GF replaces: 6324W1A001L, 6324W1A001B, 6324W1A001E, 6324W1A001H, PS3529034, 1268208, AP4457332..
This magnetron compatible for the following brands: LG, Kenmore, Whirlpool, General Electric, Jenn-Air, Amana, KitchenAid, Panasonic, Frigidaire,....
Magnetron fixes the following symptoms: No heat, and it is a replacement part for common repairing, multi-holes for installing and fixing, save your....
Please pay attention to the magnetron heat dissipation direction the model and the mount hole size before you purchase..
Package include: 1* 2M246 Microwave Oven Magnetron..

...w the current weather condition directly via our free WSView Plus or Ecowitt APP..
【PC Software】: enables you to connect the display console to a Windows computer/laptop via USB cable(included), allowing you to remotely view and analysis your weather conditions..
【Please Note Before Purchase】: This product is 915 MHz ( The products we sells in US/CA are all 915 MHz.
The European are all 868 MHz；The Australia are all 433 MHz. ).

【INDUSTRIAL GRADE 】Built with quality components for maximum durability.
【HIGH-TECH WIRELESS 】Advance 915 MHz RF with FSK modulation utilizing 20KHz to 60KHz full bandwidth IR frequency range for continuous, no noise, instant response without interference.
【WIRELESS】 - 915 MHz RF with FSK modulation utilizing 20KHz to 60KHz full bandwidth IR frequency range.
【MAXIMUM COMPATIBILITY】 - Works with most TVs, Satellites, DVD Players, Cable Boxes, Audio Components, Wi-Fi Devices, Smart Speakers and all infra-red devices.
【EXTRA LONG RANGE】Wirelessly transmit more than 200 meters / 650ft extending your remote's reach without interference.
【ULTRA COMPACT】 World's smallest remote control IR extender/repeater kit 1.77 x 1.77 x 0.59 inches.
【CONTROL MULTIPLE DEVICES】Extend as many devices as you have, within the transmitting range of your infrared devices.
【EXTRA LONG RANGE & CONTROL MULTIPLE DEVICES 】 – Wirelessly transmit more than 200 meters / 650ft extending your remote's reach without interference and being able to extend as many devices as you have, within the transmitting range of your infrared devices.
【PACKAGE INCLUDE & 1YEAR WARRANTY 】 1 x Transmitter, 1 x Receiver, 2 x Power Adapters, IR Receiver and Emitter Cables, Owne....

This is a popular replacement magnetron tube, type 2M248J XB,1000W.
As shown in the picture, the fixed hole position is 2.
1. Test between the magnetron filament terminals, the resistance value should be less than 1Ω.
2. In any filament terminal and magnetron (grounded, tested), the resistance value should be infinite.
if the resistance is small or zero, then the....

Applications Include: Long Distance LoRa Nodes, LoRaWAN, Applications, Indoor/Outdoor RAK V1 V2 Nebra Bobcat EasyLinkIn SenseCAP M1 & SyncroB.it Finestra MNTD Kerlink Helium Hotspot HNT Miner Mining etc.(915MHZ versions only）.
Antenna Connector: N Male Connector: Cable: N Female to RP-SMA Male with 3Meter KSR200 Cable.
Adapter: RP-SMA Female to SMA Male Adapter: Direction: Omni-directional.
Package List: 1 x Antenna Kit, 1 x 10FT KSR200 Cable,1 x Adapter (As the Picture Shown).
Note: The installation mast is not included.
Installation reminder: If it is used outdoors, we recommend that you install it in an open place, please keep it as vertical as possible, install the antenna at the highest place outdoors to get a better signal. if it is used indoors, we recommend placing this inside near a window..
Note: the longer the cable, the greater the gain loss for the antenna, If you need a longer cable, We recommend buying MORE THICKER LOW LOSS cable and suitable length of cable (must be 50ohm) , If want to get more witnesses..
If the witness is down or there is no change, when using this antenna for the first time, ....

Compatible with CRSF protocol receiver only, Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, 2.4GHz).
10x PWM outputs, PWM frequency configurable (50Hz default, 100,160,330, 400Hz).
2x UARTs (for Receiver and GPS), Rated voltage: 4~9V @5V pad, 0~36V @BAT+.
Packing: 1x CRSF-PWM-C, 1x low ESR capacitor, Dupont 2.54 pins.

✔️ Compatible with all popular helium miner hotspot: BOBCAT miner 300, NEBRA HNT Indoor/Outdoor Hotspot Miner, RAK V2 Hotspot Miner, Syncrob, Sensecap, MNTD.
✔️ Application scenarios: Helium miner, Low power radio ( Sigfox, LPWA, LoRa), mesh networks, IoT.
✔️ Packing list: 1 x fiber glass antenna 2 x installation mounts 1 x 3Ghz N-male to N-female lightning arrester.
✔️ 100% satisfaction guarantee. Please contact us if you have any question..