Best 80mm Nozzle

TIMBERTECH Multi-Purpose Airbrush Set, AG-183K Dual-Action Gravity Feed Airbrush Kits with 0.3/0.5/0.8mm Needles, 2/5/13CC Fluid Cup for Cake Decorating, Painting, Tattoo, Models Art

Elite Airbrush Nozzle Set Design(Screw out or on by hand).
3 sizes of screw on gravity fluid cups: 2ml, 5ml and 13ml.
3 different size of nozzle: 0.30mm, 0.50mm(Mounted) and the 0.80mm.
Sprays light to highly viscous coating materials while ensuring a high flow of color with a different spray pattern.
Great for Fine Art, Nail Art, Temporary Tattoos, Cake Decorating, Hobbies, Crafts, Car Graphics, etc. Please note that the airbrush needs air compressor to get to work..

Check Stock

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Gray)

【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / – 0.03 mm, 1 KG Spool (2.2lbs)..
【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..

Check Stock

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Black)

【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / - 0.03 mm, 1 KG Spool (2.2lbs)..
【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..

Check Stock

GOLF Perfume Atomizer, 6Pcs 5ML Mini Refillable Empty Perfume Atomizer Bottle, Refillable Perfume Spray, Scent Pump Case, Perfume Atomizer for Travel Outgoing

Material: PET (Polyethylene Terephthalate) inner container & metal shell,lightweight and durable aluminum material makes it ideal for placing in your handbag or pocket.
Package included:6pcs perfume spray bottles（Blue/Silver/Rose Pink/Red/Green/Gold）.
How To Use:Before the bottom filling bottle is filled with liquid, please open the lid, spray several times according to the nozzle, discharging the gas in the bottle,insert the nozzle of your perfume bottle into valve at the base of atomizer,after filling, spray a few times to accelerate the closure of filling port. Don’t be too full, just fill a little bit above the window.

Check Stock

PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Transparent

①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..

Check Stock

DNHCLL Pack of 2 Black Professional Plastic Hair Dryer Diffuser, Dryer Nozzle Wide Design Plastic Hair Dryer Nozzle Replacement Blow Flat Hairdressing Salon Styling Tool

Plastic Black Hair Dryer Nozzle which is lighter, more durable, and very powerful..
Material: high temperature resistant PC material.
You can use this dryer to achieve the perfect blow dry safe in the knowledge that it is helping to keep your hair clean and pure..
By helping of the nozzles to a lookout gather and dispersed, reduce impact for your hair , so as not to mess up your hair, leaving hair beautifully radiant, sleek and shiny as you style..
This Hair Dryer Nozzle is ONLY suitable for professional models with an outer diameter of 4.5cm. (It is not recommended to buy for the outer diameter is less than 4.3cm or more than 4.6cm).

Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..

Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.

Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....

Check Stock