Best 8 Dent Reed

Juvale Thin Flat Reed Coil, 5/8\ Wide for Wicker Basket Weaving, DIY Crafts (0.5 lbs, 118 Ft)

5/8” Flat Basket Reed: This pack includes 118 ft of long, flat, very thin reed material for creating lightweight baskets, or embellishing tabasco baskets.
Customizable: This basket weaving accessory can be colored or stained to create different visual effects and to match different aesthetics.
Perfect For: The very thin reed coil is made of a soft maple wood material and is ideal for crafting small baskets.
for the best results, soak before weaving.
Easy to Work with: Our basket reed is evenly milled and smooth, making it easy to shape.
Dimensions: Each wooden roll of reed measures approximately 0.625 inches wide and 118 feet (36 meters) long.

Check Stock

Living in the Light (feat. Eric Golub)

【New Design】:New designed Led Double Panel Line Board with Ajustment Holder,dent removal painless repair Panel for dent..
【Product Dimensions】:8.3 inch*13 inch.nput Volts:12V DC light. Pump suction cups diammeter 2.5 inch.
【Two Color Modes】:This LED reflectoer line board has two diiferent colors on both sieds:one is white black and the other is yellow black. You could choose the one that have the most clear result for detect the dents..
【Easy to Operate】:Its for aligning the reflected lines of the board to a dent. The reflection becomes distorted where the dent is and you can then work your tool behind the dent to make the distorted image even or uniform again, once the distorted image or lines become parallel in the reflection you have successfully removed the DENT!.
【Good Function】:This model can be attached to a vehicle using its STRONG SUCTION CUP BASE on FLAT METAL, GLASS and PLASTIC areas. (THE SUCTION CUP MAY VARY IN COLOUR DEPENDING ON AVAILABILITY) Using the line board takes much practice to understand but once mastered, you’ll discover incredible detail. A key importance is to keep your board at a 45 degree angle. The thinner the lines, the more detail you will notice..

Check Stock

VEVOR Rods Dent Removal Kit, 13 Pcs Paintless Dent Repair Tool, 5 Pcs Stainless Steel Dent Rods, 8 Pcs Tapper Heads, Professional Hail Dent Removal Tool for Minor Dents, Door Dings and Hail Damage

What The Kits Can Do: With 5 pcs paintless R-style dent repair rods, you can repair your car effortlessly and no damage to the original paint of your car body. Rod dent removal kit is great to pop out dents efficiently and securely. It is also suitable for metal surfaces, like automobiles, refrigerators, motorcycles, and washing machines..
5 PCS Dent Removal Rods: Includes 5 PCS dent removal rods of different sizes (R1-R5). This rod set belongs to long-style rods with a round shape of tips. The length range is 1.36 ft to 2.26 ft. Ergonomic pliers can be designed to save labor and are easy to lift and suitable for car dents in the deep where our hands are inaccessible..
How to Use: You can use the light reflector board to detect the deformation that needs to be repaired. Choose the most suitable tip-shaped dent remover tool. Move the dent from the inside or below the panel outwards. Use a rubber hammer to repair bumps..
8 PCS Detachable Taper Heads: Including 8 pcs, detachable tapper heads are made of rubber and plastic material. All the tapper heads can be compatible with 5 pcs rods to handle different dents. The rubber heads cause zero damage to your original paint..
Durable Stainless Steel: All the rods are made of stainless steel, which is not ea....

Check Stock

97PCS Dent Puller Kit, Paintless Auto Body Dent Repair Kit with Golden Lifter, Slide Hammer T-bar Dent Puller, Bridge Puller, Suction Cup and Glue Gun for Car Dent Remove Auto Body Dent Removal Kit

【Paintless Dent Repair Kit Professional】Our Dent Puller is made of superior alloy+plastic, and the contact parts of the body are high-class rubber precision package, which can avoid damage to the original car paint..
【Ergonomic Design】Auto body tools are ergonomically designed using the lever principle. Ensuring a comfortable grip and reducing hand fatigue, allowing you to work for longer periods without discomfort..
【Efficient Repair】The gold dent lifter and bridge dent puller can adjust the level to better fit slight dents with less effort and efficiently. T-bar puller comes with 2 different big puller lines. For big dents, you can use the puller lines.For small dents, you can use the blue glue tabs..
【Versatile Dent Puller Kit】The car dent repair kit is perfect for a wide range of auto body repair tasks, including dent fix, hail damage repair, and more. These body repair dent removal tools can be used on various surfaces, including metal, plastic..
【Comprehensive Set】1x Bridge Dent Puller(with 8 x accessories), 1x T-bar Puller(long and short type), 1x Gold De....

Check Stock

CXGS Paintless Dent Repair Pull Tabs Removal Tool 8Pcs Aluminum Puller Glue Tabs with 5Pcs Plastic Glue Pulling Tabs Professional DIY Auto Body Dent Repair Small Dent Remover Kits for Car Dent Repair

【13PCS Paintless Dent Removal Kits】Package includes 8 PCS aluminum glue puller tabs and 5 PCS plastic glue puller tabs. Different kinds of size gaskets are fit for different dents and hail damage fix, These premium tabs are strong and durable, which can avoid damage to the original paint, which is more efficient and labor..
【High-quality Puller Tabs】We supply most quality auto body repair tools for more timely repair dent. The small dent removal kit is made of high durability Aluminum and hard plastic, high adhesion, not easy to break when working. Advantages of both: Plastic Tabs are more adhesion, Aluminum Tabs are more solid, which can be reused..
【Widely Use】The paintless dent repair tabs can save a lot of money for you compared with the auto body shops. This is a well-built dent popper for car that is the ideal tool for moving dent area in any home, garage, shop or professional body shop. Used for dent repairs of cars, refrigerators, motorcycle, washing machines, etc..
【How To Use】Clean the dent with a clean wet cloth, use the heat glue stick glue to the glue tab, then fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, hold the glue tab with the lifter puller.(Note....

Check Stock

ROADGIVE 100PCS Paintless Dent Repair Kit, Adjustable Dent Removal Kit Auto Body Dent Repair Tools with Gold Dent Lifter, Bridge Puller, T-Bar Suction Cup Puller for Auto Dent Removal

【Effortlessly Dent Repair】The car dent puller is a cost-effective solution that saves you money in the long run.T-bar Puller, Bridge Puller and Gold Lifter are suitable for large, medium and small car dents respectively. You can choose the corresponding repair tool according to the size of the dent..
【2 IN 1 T-Bar Puller】The t-bar puller is made of aluminum and uses a lever design. Our set comes with four pulling lines, fit with bigger dents. Meanwhile, The remover can be detached into a short T-bar puller with 50 glue tabs, which can solve most dent problems we meet..
【Bridge Dent Puller】The bridge dent puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor. Not only can it work with 8 bridge puller tabs, but it also can use with 50 standard glue tabs..
【Gold Dent Lifter】By using high-class metal materials and uses the soft rubber of the bottom. It will not damage the original paint. Rotate the top button to better fit different size dents.
【Versatile Applications】This paintless dent repa....

Check Stock

MOUKIM Car Dent Puller Suction Cup Dent Repair Puller Car Dent Removal Suction Cup Car Dent Repair Tool for Car Dent Repair, Glass, Tiles and Objects Moving black

How to use the dent puller paintless dent repair?Clean the dent with a clean wet cloth.
Mount the glue stick into the glue gun,pull the trigger to let the glue stick into the glue gun, connect the power source and preheat for 5 minutes(Note: Glue not included.You need to buy the Hot Glue Gun by yourself).
Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).
Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).
Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
(Note: :The 18 gaskets are all made of hard plastic and have no suction itself. It is necessary to melt the glue stick with a hot-melt glue gun and apply it to the gaskets for use).
Check with a line board. If dent still exists, knock it slightly with a flattening hammer or pen.

Check Stock

Nova 6050 1-1/2" Multi Project / Duck Call Jaws Jaw Set

Pre-formed sounding board/reed assembly parts only.
A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
Includes (1) PKGCALL23 Smoke Arkansas Magnum Double Reed Duck Call Woodturning Kit.
Designed and tuned by game call professionals.
Sound like a flock of mallards ranging from high up to a feeding call.
This double reed style takes more air to blow and doesn't have as much range as single reed models (PKGCALL2), however it have a "sweet spot" that sounds more realistic to passing ducks.
Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".

Check Stock

VEVOR Paintless Dent Removal Rods, 68 PCS Paintless Dent Repair Tools, 10 PCS Stainless Steel Rods Car Dent Repair Kit, Glue Puller Tabs Dent Puller Kit for Auto Dent Removal, Minor Dents, Door Dings

What The Kit Can Do: With the perfect 68 pcs paintless dent repair tool kit, you can repair your car effortlessly and no damage to the original paint of your car body. Hail damage repair kit is great to pop out dents efficiently and securely. It is also suitable for metal surfaces, like automobiles, refrigerators, motorcycles, and washing machines..
68pcs Dent Removal Tools: 68 pieces of tools in the package. 10 x Rods (B8-B11, C1-C6), 1 x Slide Hammer, 1 x Hammer, 1 x T-bar Hail Hammer, 1 x Hot Glue Gun, 1 x Bridge Puller, 34 x Puller Tabs, 20 x Glue Sticks, 1 x T-Bar Puller Dent Lifter, 1 x Golden Dent Lifter, 1 x LED Board, 1 x Tap Down with 9 heads, 1 x Yellow Plastic Shovel, 1 x Toolbag, 1 x Air Wedge. All the above tools allow you to repair different dents easily..
Save Energy And Time: According to our tips, you can quickly learn how to use these tools. Apply the heated glue stick to the puller tabs. Attach tabs to the depression.
wait about 2mins. Place the dent lifter and pull slowly. Spray a little alcohol, shovel off the glue. One large bag is provided, making the tools are portable. You can use them at any time and anywhere. You never need to pay many dollars each time in automotive repair shops..
10pcs Dent Removal Rods: There are 10 r....

Check Stock