Best 60 plasma

IPT 60 Consumables Kit 0.9mm for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Plasma Cutter 10pcs

  • Plasma swirl ring ref code: 60028 / IVF0601.
  • Plasma swirl ring can fit Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch.
  • You can get one (1) piece plasma cutting swirl ring with this price.
  • These palsma cutting consumables are aftermarket parts, not Origianl.
Check Stock

IPT-60 Torch Swirl Ring IVF0601 for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Plasma Cutter 5pcs

  • Plasma swirl ring ref code: 60028 / IVF0601.
  • Plasma swirl ring can fit Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch.
  • You can get Five (5) pieces plasma cutting swirl ring with this price.
  • These palsma cutting consumables are aftermarket parts, not Origianl.
Check Stock

Plasma Swirl Ring IVF0601 for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Cutter IPT-60 Torch 1pc

  • 70pcs Plasma cutting consumables kit equivalent to Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch consumables, aftermarket replacement, not original.
  • IVB1048 / 52582 Plasma electrode x 35pcs.
  • IVU10668-11 / 51313P.11 Plasma tip / nozzle x 35pcs, Flat contact tip, diameter 0.043in / 1.1mm.
Check Stock

ICE-60T/TM Plasma Torch Electrode Tip 212724 219676 Drag Shield 212730 for Miller Spectrum 875 Cutter 35pcs

  • 35pcs Plasma cutting consumables kit equivalent to Miller Spectrum 875 cutter ICE-60T ICE-60TM plasma cuttin torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 20pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Amico AG-60 60-Amp/13-Feet Plasma Cutter Torch For CUT-30/40/50 APC-30/40/50 CUT-45M/55M CTS-160/180/200

  • The handle is designed ergonomically, allowing for long-term use due to the comfort and safety of the item. The design is elegant, flawlessly....
  • AG-60 is professional high-quality plasma cutting torch gun with excellent cutting results. The torch head is made of high-quality materials and is....
  • The characteristics of the AG-60 plasma cutting are fast cutting speeds, high precision, small cutting gaps, and small thermal deformation. The....
  • The length of the AG-60 cutting gun is 13 feet and the rated current is 60 amps. It can withstand a tracheal pressure is 250 psi. The maximum cutting....
  • AG-60 is designed for the AMICO ELECTRIC plasma cutting machines: CUT-30/40/50, APC-30/40/50, CTS-160/180/200 and CUT-45M/55M. Complementary parts:....
Check Stock

AG60 SG55 WSD60 Air Plasma Cutter Torch Gun Completed Plasma Cutter Machine Non-Touch Pilot Arc Plasma Cutting Equipment WSD60 Torch Fit CUT50P CUT60P CT312P (3M 10ft)

  • AG60 SG-55 WSD60 Plasma Cutter Cutting Torch Gun Completed with pilot arc non-touch plasma cutter machine..
  • Rated welding current: 50-60A. The WSD60 plasma cutter is suitable for two-hole connection machines..
  • Fit for this Torch (gun) can be used for machines such as CUT50P CUT60P CT312P etc cnc machine.
Check Stock