Best 6 Panel Door

National Door Company, Exterior with Two Sidelites Door, Steel, 64"" x 80"", 6-Panel, No Glass Classic 6 Panel Collection, Right-Hand Inswing

No Glass Classic 6 Panel 6-PanelClassic 6 panel design.
Right-Hand/Inswing: When viewed from the exterior of the home, a right-hand/inswing has the hinges on the right, the knob on the left and swings into the home.
24-Gauge galvanized steel door is resistant to rust and corrosion. Prehung on 4-9/16 inch wide primed composite frame.

Check Stock

DreamLine Unidoor Plus 35 in. W x 34 3/8 in. D x 72 in. H Frameless Hinged Shower Enclosure in Chrome, SHEN-24350340-01

Model Size: 35 in. W x 34 3/8 in. D x 72 in. H.
Configuration: Shower Door with Inline and Return panel.
Premium 3/8 in. (10mm) certified tempered glass.
DreamLine ClearMax water and stain resistant glass coating.
Reversible for a right or left door opening.
Solid brass wall-to-glass self-closing hinges.
Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
1/2 in. width or out-of-plumb adjustment available on Return panel side.
Pictured SlimLine shower base is not included.
IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
Wall studs or other reinforcement behind finished walls required for hinge installation.
34-3/8 in. D x 35 in. W x 72 in. H Chrome finish hardware. Door walk-in: 28 in. Panel(s): 6 in. Finished walls are required for width measurement.
U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.

Check Stock

SMARTSTANDARD 2 Pack Flush Pull 6 1/2

Sturdy Heavy Duty Material: The SmartStandard Heavy Duty Door Handle made of Solid Cast Iron & Frosted Black Surface, maintenance free and fit for long term usage..
Door Panel Thickness: > 1/2 inch (If you want to use for a thicker door panel, you can buy some longer screws to match the door).
Finger pull size: 6 1/2" * 2 1/8" * 1/2", hole spacer: 5 1/2"..
Widely Use: SmartStandard handles can be used for doors, gates, garages, barns, sheds, closets, sliding doors etc. Choose from a variety of styles to decorate your house!.
Easy Installation: Package includes the proper mounting hardware (4 screws), it will be sufficient for you to completing the assembling..
Package Included: 2 X Finger Pull, 4 X Screw..

Check Stock

CCJH 9FT Ceiling Mount Bracket Sliding Barn Door Hardware Kit Black,Strong Bearing, Low Ceiling L-Shape Bracket System, Fit 54\ Wide Single Door Panel (Basic Style)

【Durable & Sturdy】: CCJH Sliding barn door hardware kit is made of heavy duty construction steel, Sliding smoothly.
Maximum loading capability is 220lb per door.
Fit for 1 1/4"-1 7/8" thickness door panel.
The clearance between door panel and wall is about 5/8".
【Ultra Quietly】:Super silently nylon wheels bring no noise when sliding your door.
Spring damping door stopper make the close more softer and comfortable.
Give you pleasant mood as no noise when using CCJH sliding barn door hardware kit.
【Flexible Installation】: In the installation book of CCJH Barn door hardware, we line up the exact size of each parts clearly and make detailed explanation for installation step with image and text, you can enjoy a happy DIY installation process.
【Package Listing】: Spliced pre-drilled holes rails with full set installation screws.
rollers*2, full set of L-Shaped Bracket, door stoppers*2, floor guide*1, Anti-Jump blocks*2, door panel is NOT INCLUDED.
Please reserve 6'' space from the top of the door to the ceiling.
【Professional Service Team】:Please feel free let us know if some parts is missing when you receive it, or other trouble during use, we will help you solve the problem immediately..

Check Stock

Western Reflections Laurel Traditional Style - Front Door Glass Replacement - Entry Door Insert Kit with Triple Pane Tempered Glass - 24\ x 38\ Tan Frame - Nickel Caming

✔️DECORATIVE GLASS DOOR REPLACEMENT FOR A 24" X 38" FRAME - This door glass kit will replace an existing door glass panel with outer frame dimensions of 24” x 38” (+/- 0.25”), and a door thickness of 1-3/4”. Perfect replacement for the following existing door glass panels: a) Half Light on a 6’8” door. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers..
✔️COMPATIBLE WITH STEEL OR FIBERGLASS DOORS - Door glass kits are suitable for particular steel and fiberglass doors, depending on the panel configuration, and they must be 1-3/4" thick. Make a beautiful home improvement at a fraction of the cost of a new door. This is a great way to extend your door's lifetime value..
✔️EASY TO INSTALL - Replacement of the same size existing door inserts typically take under an hour. You only need standard tools like safety glasses, drill with a Phillips head bit, and a putty knife. Two people are recommended to tackle this project..
✔️CLASSIC LOOK FOR YOUR HOME'S ENTRANCE- Raise the bar on your home's curb appeal with a Laurel doorglass. A mix of glass textures with a focal bevel cluster creates a sophisticated look, offering a medium-high level of privacy..

Check Stock

GlobPro CK900200 Dishwasher Detergent Dispenser Compatible with Kenmore, KitchenAid, Whirlpool WP8558129

NOT UNIVERSAL ONLY Compatible with old number 8558129, 1066136, 8269121, 8269996, 8270032, 8270034, 8531825, 8558128, 9744542, 9744543, PS11746408, AP6013186, If the number no match, the dispense NOT FIT in your model, see model in around cabinet door.
Compatible with Kenmore, KitchenAid, Whirlpool WP8558129, Fits old numbers 8558129, 1066136, 8269121, 8269996, 8270032, 8270034, 8531825, 8558128, 9744542, 9744543, PS11746408.
ORIGINAL SIZE, avois additional wires or supports, compare conector, same terminal conectorss.
Perfect fit for old numbers and colors, just compare the conectore before to order,.
dispenser door was not closing 1. Remove torx screws (T-15 torx screws) around outer edge of inside of door. 2. Separate outer door panel from inner door panel. 3. Locate dispenser, and remove 6 hex nuts and 2 wires for solenoid. 4. Insert new dispenser and re-insert hex nuts. 5. Reinsert torx screws..

Check Stock

WELLHOME 6.6 FT Sliding Hardware Kit+ 36inX84in K Series DIY Solid Interior Barn Knotty Wood Painted Door Dark Walnut

100% made in USA with high quality solid pine wood.DOOR ASSEMBLY IS REQUIRED !.
This simple assemble door was PAINTED. Door dimension:W:36''in,H:84''in and thickness1 1/2''.Interchangeable cross planks allow you to create five....
Pre-drilled pilot holes for easy assembly and all screws are included..
Door panel thickness:3/4''in and 1- 1/2''in..
Package Include: 1x6.6ft Flat Track,5xSpacer&Lag Bolt, 2xSteel Hanger, 2xDoor Stopper, 2xAnti-jump Pad,1xFloor Guide,For 16 inch stud.

Check Stock

U-MAX 6.6 FT Sliding Barn Wood Door Basic Sliding Track Hardware Kit (Basic\J\)

Door panel thickness: 1 3/8" and 1 3/4"..
Package Include: 6.6ft(2x3.3ft) Rail,5xRail Spacer,2xRoller,2xDoor Stop,2xEnd Cap,1xFloor Guide,1xHex Key.
All other necessary hardware is included as you see in the pictures. For 16 inch stud..
ONLY the hardware is for sale, DOOR NOT INCLUDED..
Support: We are the manufacture of the sliding door hardware. If there is any part missed or defectived during shipping, please let us know, we will send replacement at no charge for missing/defect parts at first time..

Check Stock

CCJH 6FT Track Sliding Barn Door Hardware Kit Heavy Duty for Single Wood Door (J Shape)

【Premium Material】: CCJH Sliding door kit is made of high quality carbon steel with black powder coated surface to ensure anti-corrosion and years of beauty and longevity..
【Slide Smoothly and Quietly】: Super silently nylon wheels bring no noise when sliding your door.
Spring damping door stopper make the close more softer and comfortable.
Give you pleasant mood as no noise when using the kit..
【Notice Please】: 6" minimum clearance is needed above top of door. Fit Max. door panel width 36".
Fit door panel thickness: 1-3/16" to 2". Rail is predrilled with 16" hole apart. DOOR WEIGHT CAPACITY - 330 lb.
【Package Include】: Comes with all necessary hardware for hanging the door. Including SPLICED TRACK.
1*Floor Guide and others. 1*Step by Step Manual. HARDWARE ONLY, DOOR NOT INCLUDED..
【Easy to Install】: Professional instruction and customer service team help you solve all problems in time. If any part missed or defective during transit, please feel free to tell us. We’ll send replacenment from our US WAREHOUSE as soon as possible..

Check Stock