Best 5 flat bottomed Plate

Mantis MantisX MagRail - Universal - Magazine Floor Plate Rail Adapter

  • For attaching MantisX to the bottom of your firearm magazine.
  • Short Picatinny rail to attaches to bottom of magazine floor plate.
  • Attaches with VHB high strength adhesive tape, works with live and dry fire.
  • Note: Requires magazine floor plate to be flat.
Check Stock

Corning 3993 Polystyrene Flat Bottom 96 Well Half Area Solid Black Microplate, Without Lid, NBS Treated (Case of 25)

  • Low volume solid black polystyrene microplate has a round well design with a flat bottom and a 2.8mm distance between well bottoms to plate bottom.
  • Nonsterile microplate has a 50L total well volume and a recommended working volume of 5 to 40L.
  • Validated by Molecular Devices for the FLIPR reader.
  • outer wells aligned for proper viewing with FLIPR.
  • Nonbinding surface (NBS) is a treatment technology used on polystyrene microplates to create a nonionic hydrophilic surface (polyethylene oxide-like) that minimizes molecular interactions.
Check Stock

Tutor Auto Car License Plate, Electric License Plate Holder for US Universal License(Black)

  • ...tes which is tailored for American license plates.
  • ✅【Easy Install】: These cool license plate frames and clear license plate cover are made of good quality silicone and clear plastic.
  • Anti-rattle and anti-rust, rain-proof and resistant to deformation.
  • Even edges and surfaces.The 5 drain holes are located at the bottom side lateral incision of the frame to ensure release rainwater and dust, Car wash worry free! Easy to install and dismantle, unobstructed license plate, support safe driving.
Check Stock

Recessed Cable Wall Plate 4 Pack with Fly Mounting Wings Bottom Opening for Wall Plate Cable Pass Through for Speaker Wires, Coaxial Cables, HDMI Cables, or Network/Phone Cables WI1009-4

  • Wi4you recessed tv outlet box Build-in Easy mount wings - easy mount recessed wall plate, no additional bracket needed, perfect for wall wire pass through, great solution for data cord outlet.
  • Bottom opening cable management wall plate - recessed coax wall plate for cables management, 1 gang recessed low voltage plate, bottom or Side opening for wall cable pass through.
  • Recessed cable plate for cables and wires concealing - low voltage cable plate, effective recessed wall outlet for TV, hide wires in wall behind the flat TV or other electric media.
  • ABS multimedia wall plate - the recessed wire box plate is made of non-broken ABS material, solid recessed cable plate.
  • Pack & Warranty - 4 pcs recessed cable wall plate for TV.
  • Search "Wi4You" for more wall plate solution.
Check Stock

Silicone License Plate Frame with Cover Combo- Flat Clear License Plate Shield and Rustproof Black Car Tag Holder, 1 Set Unbreakable Transparent Protector with Stainless Steel Screws Caps

  • Rustproof Silicone Car Plate Frame: The matte black car tag holder is made up of industrial-grade silicone, unlike heavy-duty stainless steel, aluminum, carbon fiber, the soft silicone material will not scratch the car paint and can protect the license plate rattle proof. The bottom of the matte black license plate frame is designed with 5 drainage holes to drain rain and dust in time to keep the plate clean and tidy.
  • Unbreakable License Plate Protector: The clear flat license plate cover is made from acrylic with UV resistant stabilizer to prevent discoloration and cracking. Novelty car plate shield provides protection from the elements and extends away from the plate keeping them looking clean and new. The plastic car tag protective cover is lightweight and crystal clear, guarantee legal street.
  • For USA Standard License Plate: The license plate cover and frame are designed according to the 12 * 6 inch American license plate. The 4-hole thin edge silicone liscen plate cover will not block the registration Stickers on the metal license plate. Drive safely and won 't be stopped by the police. Comes in 1 set for your car's front or rear license plate.
  • Easy To Install: The kit contains license plate mounting hardware- stainless steel license plate screws, ....
Check Stock

United Scientific Supplies CGP2X2 Plate, 2\ Width, 2\ Length, Cobalt Glass (Pack of 6)

  • Pack of 10 clear polystyrene well plates with lids.
  • Each plate features 24 flat-bottomed wells with 3.5ml capacity, approximately 5/8" deep and 10mm in diameter.
  • Plates measure 5" long x 3.25" wide x 7/8" tall.
  • Also available in 96-well design (F1003-U).
Check Stock

Beilay 8\ Black Heavy Duty Painted Square Turntable 360 Degree Rotating Iron Turntable

  • Made of steel, this swivel plates are strong, Full ball bearings makes this swivel plate more durable,Easy to install,Swivel plate,barstool swivel plate,bar chair part..
  • Steel – black painted finish, full 360 degree rotation (non-return) on pre-lubricated ball-bearings in a full round track..
  • These replacement ball bearing swivel plates are popular for bar stool, chair, table applications, square flat profile top & bottom plates..
  • This flat swivel plate is full ball bearings and no need a plastic race to keep the ball bearings separated apart from each other. This also means better at distributing weight and a longer lasting smoother running swivel..
  • Note: Swivels are not meant to rotate freely when handled individually and may be difficult to rotate before installation.This is normal to avoid too loose of a rotation when in use..
Check Stock

HICTOP Ender 3 v2 Upgrades Flexible Build Plate PEI Steel Sheet 235x235mm Works for Ender 3/Ender 3 Pro/Ender 5 3D Printers

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lasting，The service life of our pei is 10 times longer than other Glass Bed.
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.It can be cleaned easily with water or alcohol.
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time.
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, without using any glue or other tools to help the model to stick onto the sheet.
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for AUTO CAR TRUCK VAN SUV GOLF CART Quantity Discount (9.45$ to 5.60$)(each with 6 Unique Screws+Wrench+2 Built In Nuts) (1)

  • ► ⇧⇧⇧ CHOOSE YOUR QUANTITY OF LICENSE PLATE BRACKETS FOR AUTO CAR TRUCK VAN SUV GOLF CART ⇧⇧⇧ ►???? Qty.:1 (9.45$).
  • ► ???? Compatibility: It’s a design made to fit ALL MODELS with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
  • ► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
  • ► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 2.5&....
Check Stock