Best 5 dihydroxy 1

OdontoMed2011 Dissection Kit- First Aid Kit 24 Pcs Advanced Lab Dissection Kit for Anatomy & Biology Students Lab Veterinary Botany Stainless Steel Instruments & 11 Bonus Scalpel Handle MLT-01

  • Cynamed Reusable Advanced Dissection Kit- 44 Pieces Total.High Grade Stainless Steel Instruments Perfect for Anatomy,Biology,Botany,Veterinary and Medical Students W/Scalpel Blades #11 #20 Comes With Zipper Case.
  • SET INCLUDES Following :1 Ea 5” Scalpel Knife Handle #4 1 Ea 5” Scalpel Handle #3 1 Ea 5” Teaser Needle - Straight point 1 Ea 5” Teaser Needle - Curved point 1 Ea 5.6” Operating Scissors.
  • 1 Ea 4.6” Iris Scissors 1 Ea 5” Needle Driver 1 Ea 5” Mosquito Forceps 1 Ea 5” Wide Body Tooth Tissue Forceps, 1 Ea 5” Specimen Serrated Forceps 1 Ea 4.5” Micro Forceps.
  • 1 Ea 5.6” Groove Detector 1 Ea 5.5” Dissecting Spatula 1 Ea 3.5” Magnifying Glass (plastic handle) 1 Premium Quality Carrying Case.
  • 15 - Disposable Scalpel Blades #20 for Handle #4 15 - Disposable Scalpel Blades #11 for Handle #3..
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

MABUARN ER Spring Collet ER11 ER16 ER20 ER25 Set with Plastic Case for CNC Lathe Engraving and Milling Tool Workholding Chuck ER16 AA 13PCS

  • Material: The ER spring collet set is made of high quality 65Mn spring steel with high wear resistance and durable characteristic..
  • High performance: The run-out tolerance of AA type is less than 0.0003"..
  • Application: It's suitable for CNC, engraving machines and other equipment. Used in milling, boring, drilling, wire tapping and other operations,.
  • Gripping range: --ER11 10PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32").
  • --ER16 13PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 13/32").
  • --ER20 15PCS (1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32". 5/16", 3/8", 13/32", 7/16", 15/32", 1/2").
  • --ER25 20PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 3/4")..
  • Package: ER11: 10pcs of collets with a strong plastic case.
  • ER16: 13pcs of collets with a strong plastic case.
  • ER20: 15pcs of collets with a strong plastic case.
  • ER25: 20pcs of collets with a strong plastic case..
Check Stock

Dritz 24P Heavy Duty Snap Pliers Purple

  • Heavy duty snaps are ideal for garments such as jackets, coats, vests, tops and sportswear.
  • Heavy duty snaps are also popular for making accessories such as bags, totes, belts, fobs, wallets and device cases.
  • Use to apply Size 24 - 5/8-Inch (1.58 cm) snaps - Dritz Item Numbers: 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-32, 5-33, 5-38.
  • Use to apply 9/16-Inch (1.42 cm) western snaps - Dritz Item Number: 105-3.
  • Package contains 1 pair of pliers, 5 tools, 1 tool remover, 2 replacement inserts, and illustrated instruction guide.
Check Stock

Wiha 13669 Hex L-Keys, Insulated, Inch, 5/16

  • Insulated Inch Hex L-Key. 5/16" x 5.7". Short length 1.375".
Check Stock

TEKTON 1/4 Inch Drive 6-Point Socket and Ratchet Set, 55-Piece (5/32-9/16 in., 4-14 mm) | SKT05301

  • Includes 11-pc. 1/4 in. drive 6-pt. inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 11-pc. 1/4 in. drive deep 6-pt. inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 13-pc. 1/4 in. drive 6-pt. metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 13-pc. 1/4 in. drive deep 6-pt. metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 1-pc. 1/4 in. drive 90-tooth quick-release ratchet: 6 in..
  • 1-pc. 1/4 in. drive spinner handle: 6 in..
  • 2-pc. 1/4 in. drive extension bars: 3, 6 in..
  • 1-pc. 1/4 in. drive hex bit holder: 1/4 in..
  • Complete set has every size from 5/32 to 9/16 inch and 4 to 14 mm in both deep and standard lengths.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
Check Stock

Wisepick 42Pcs Rethreading Tool Set Car Rethreader Restorer Repair Tool Kit Includes Metric, UNF and UNC Sizes

  • 21 Pcs Dies: Inch fine sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8".
  • Inch coarse sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8".
  • Metric sizes: 6x1.00, 8x1.25, 10x1.25, 10x1.50, 12x1.25, 12x1.5, 12x1.75mm.
  • 19 Pcs Taps: Inch fine sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16".
  • Inch coarse sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16".
  • 2 Pcs Thread Files: SAE size: 11, 12, 13, 14, 16,18, 20, 24.
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • ... constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches (x2): M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D adn one T-Type tap wrench: M3-M6..
  • SAE Tap Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNC, 12-24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1.0, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/4-18NPT, 1/8-27NPT.
Check Stock

Nut and Bolt Thread Checker (Complete SAE/Inch, Metric Set and Wheel Lug/Stud)

  • COMPLETE SET: Comes with standard, metric, and lug nut thread checkers for a complete set..
  • SAE SWTC-S21: Inch sizes are 6-32, 6-40, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16, 1-8, 1-12.
  • METRIC SWTC-M21: Metric sizes are M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0.
  • LUG NUT SWTC-LN8: Lug nut sizes are M14x2.0, M12x1.75, M12x1.25, 7/16-20, M14x1.50, M12x1.5, 9/16-18, 1/2-20.
  • STAMPED THREAD SIZES: The thread sizes are permanently stamped onto each gauge so you will always know the size of the thread. Inch gauges are clear zinc plated, metric gauges are black oxide, and lug nuts are color coded for easy identification..
Check Stock