Best 5 16 Inch Washer

RIDGE WASHER Surface Cleaner for Pressure Washer, 16 Inch, Power Washer Surface Cleaner Attachment with 2 Pcs Extension Wands and 2 Pcs Replacement Nozzles, 3600 PSI

  • WARM TIPS: Power washer surface cleaner with 1/4'' standard quick connect fitting's working pressure is up to 3600 PSI.
  • Surface cleaner also has 3 pcs wheels that help power washer surface cleaner move easily and flexible on large area. Surface cleaner for power washer's size is 16'' X 16'' X 3.9''. Pressure washer surface cleaner also has flexible bristle skirt, it protects adjacent surfaces and resist water splash out while working..
  • UPGRADE FEATURE: Surface cleaner for pressure washer 's much more efficient than normal pressure washer spraying nozzle, and more easier to handle.
  • It's easy and suitabe to clean concrete driveways, sidewalks, terraces, decks, etc..
  • 15 inch pressure washer wands are connected thread, avoiding leakage at the connection.
  • The wand can connect between pressure washer gun and surface cleaner, let surface cleaner to reach further area. One of the 2 wands has universal 1/4’’ quick connect, suitable for most pressure washer attachments..
  • Pressure washer surface cleaner attachment has 2 pcs additional replacement nozzles, to avoid nozzle blocked by sand or other debris, please use water inline filter.
  • If nozzles are blocked with sand or other debris, clean with needle and rinse with fresh water..
Check Stock

10 PCS M14-2.0x45 MM Metric Hex Flange Bolts Grade 10.9 Screws Phos & Oil

  • Package Contents：5 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 5" or 125mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock

4000PSI Pressure Washer Pump Horizontal Shaft 1\ For EB4040HA With Honda Engine

  • 【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3300 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2800-3300 PSI and fit most 208-220cc 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
  • 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum for protection against rust, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
  • 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..
Check Stock

Twinkle Star 16 Inch Pressure Washer Undercarriage Cleaner Under Car Water Broom with 16 Straight Extension Wand and 16 45 Degree Curved Wand 4000 PSI

  • 16 Inch undercar cleaner for pressure washer with 4 nozzles and 2 casters(360-degree rotatable). Come with 16 Inch straight extension wand, 16 Inch 45....
  • Connect the straight pressure washer wand to the long trigger gun, and the curved wand to the straight wand. Then connect them to the car washer. They....
  • Working pressure range is 1500 PSI to 4000 PSI. Suggest working pressure is 2500 PSI or higher. Quick and easy to clean under vehicles, boats, RVs. It....
  • 1/4” quick connect plug is easy connect and release pressure washer wand. Easy to clean and use, avoid crawling under vehicles. Suitable for....
Check Stock

Genuine Ryobi 25 Braided Hose 308835065 for RY14122 & RY141900 Pressure Washer

  • PRESSURE WASHER GUN KIT: High Pressure Washer Gun, Pressure Washer Extension Wand - Power Washer Kit.
  • DON'T SACRIFICE QUALITY FOR PRICE - Featuring A Professional Approach Of Not Too Heavy But Not Flimsy. With Full Metal Internal Parts, Mixed with a....
  • 4000PSI PRESSURE WASHER GUN - Our PEGGAS Pressure Washer Spray Gun Features a Locking Trigger Safety To Prevent Accidental Sprays - It Has An....
  • 16 INCH POWER WASHER WAND- Has A 1/4’’ American Standard Quick Connector. Connects Any Accessory With A 1/4’’ QC Male Plug. Such as Nozzles....
  • PACKAGE INCLUDE: 1pc Deluxe Pressure Washer Gun & 1pc 16" Lance/Wand ( NOT FOR A GARDEN HOSE, BUT MADE TO BE USED WITH A GAS PRESSURE WASHER).
Check Stock

Olympia Faucets B-8190 Two Handle Laundry Faucet, Chrome Finish

  • Two Handle Laundry Faucet, ADA Wrist Blade Handles.
  • Hi-Tubular Spout Swivel 360-Degree, 5-1/2-Inch Reach, 5-13/16-Inch From Deck to Aerator.
  • Washer less Cartridge Operation, 2 or 3-Hole 4-Inch Installation.
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

FSLMEIL Thread Protector kit 1/2x28  5/8x24 TPI with Free Crush Washer, All Steel Threaded (4 Pack)

  • [1/2x28 TPI Thread Protector]: Length: 0.589 inch / Inside diameter: 0.456 inch /Outside diameter: 0.738 inch /weight:0.03 lbWith one free 1/2x28 crush washer.
  • [5/8x24 TPI Thread Protector]: Length: 0.588 inch/ Inside diameter:0.581 inch /Outside diameter: 0.955 inch/ Weight:0.06 lbWith one free 5/8x24 crush washer.
  • [Installation and Material]: Won’t require any tools for installation.It is a nice flat black oxide finish..
  • [Packing List] :1X 1/2x28 Thread Protector,1X 5/8x24 Thread Protector,1X 1/2x28 Crush Washer,1X 5/8x24 Crush Washer,1X box.
Check Stock

SANOL Max 3000 PSI Pressure Washer Pump Horizontal 3/4'' Shaft 2.4 GPM Power Washer Pump Replacement For Honda GC190, 309515003,308418007, G3050OHC, 020241 and More

  • 【Reborn Your Pressure Washer】SANOL Horizontal Power Washer Pump 3/4" Shaft MAX 3000 PSI / 2.4 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2600-3000 PSI and fit most 196-212cc at 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
  • 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 120 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
  • 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more..
  • 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no ....
Check Stock