Best 5 0 Inch Tft

Google Nexus 9 0P82100-16-BLK 8.9-Inch 16 GB Flash Memory Tablet Black

Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz.
Large capacity lithium battery power supply.
Supporting DC Resistance and Electrolytic Capacitance Measurement.
Automatic Recognition of Component Measurement.
Support screening and deviation measurement.
2.8-inch TFT display, 4-bit semi-display.
Display digit: Main parameters: 5 bits, secondary parameters: 5 bits.
Adjustable measuring speed, manual and automatic range.
Short circuit correction with open circuit.
Standard configuration:1. Mini-USB cable.
Adjustment of backlight brightness, Chinese and English are optional,USB device and automatic power-off time.

Test frequency: 100Hz, 120Hz, 200Hz, 400Hz, 800Hz, 1KHz, 2KHz, 4KHz, 8KHz, 10KHz.
Testing level: Six fixed level(0.1V, 0.3V, 0.6V, 1V, 1.5V, 2V).
Signal source output impedance: 30Ω , 100Ω.
Test Parameter: Principal parameter: L/C/R/Z, Secondary parameter: X/D/Q/θ/ESR.
Supporting DC Resistance (DCR) and Electrolytic Capacitance Measurement.
Data recording function (maximum, minimum, average).
With open circuit and short circuit calibration function.
Comparator sorting (5 gears), alarm function..

⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
⭐【Satisfying After-Sales Support】If you have ....

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with 2.4-inch oversized color dot matrix TFT，especially suitable for fast pairing of transistors, identification of mixed，surface mount and wordless components, and preliminary screening of small batch components..
The oscilloscope has a real-time sampling rate of 2.5ms/s, a broadband of 200kHz, a 2.4-inch TFT high-definition color screen, a complete trigger function (single time, normal, automatic) and can measure the voltage signal up to ± 400V. It is equipped with an 80kHz / 5.0V PWM wave test signal source with adjustable duty cycle, and is equipped with a funny one button auto. The measured waveform can be displayed by simple adjustment.
The oscilloscope has small volume, integrated support, free contraction, can rotate 90 degrees, does not occupy space and is convenient to carry. At the same time, it has built-in 1500mah rechargeable lithium battery and polymer lithium battery cell, which can continuously supply power for 240 minutes, which is safer and more lasting.
The crystal detector can automatically detect the pin definition and automatically analyze the infrared code of NEC protocol, automatica....

1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
2) It can detect that the consumables such as consumables are broken and the consumables are not used..
3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
4) Support the motherboard with the break detection interface..
5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..

6.5 inch 720 x 1600 (HD+) PLS TFT LCD Infinity-V Display, 5000mAh Battery, Fingerprint (side-mounted).
64GB ROM, 4GB RAM, Mediatek MT6765 Helio P35 (12nm), Octa-core, PowerVR GE8320, Android 10.
Rear Camera: 48MP, F2.0 + 5MP, F2.2 + 2MP, F2.4 + 2MP, F2.4, Front Camera: 8MP, F2.2, Bluetooth 5.0.
2G Bands: 850, 900, 1800, 1900MHz, 3G Bands: 850, 900, 1700, 1900, 4G LTE Bands: 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 28, 38, 40, 41Dual SIM.
International ModelCompatible with Most GSM Carriers like T-Mobile, AT&T, MetroPCS, etc. Will NOT work with CDMA Carriers Such as Verizon, Sprint,....

19-inch Dell 1907FPc LCD Monitor w/USB 2.0 Hub General Features: Black/Silver color scheme.
19-inch active matrix TFT LCD display Optimal preset resolution: 1280 x 1024 @ 60 Hz.
Highest preset resolution: 1280 x 1024 @ 75 Hz Horizontal scan range: 30 kHz to 81 kHz (automatic).
Vertical scan range: 56 Hz to 76 Hz (automatic) Aspect ratio: 5:4 Pixel pitch: 0.294 mm.