Best 45 degree Straight Thread Elbow

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

Brennan 6801-08-08-NWO-FG Forged Steel JIC Flared Tube Fitting, 90 Degree Elbow, 1/2\ Tube OD JIC Male x 3/4-16 Male Straight Thread O-Ring Boss

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • Fitting connects to tubing on one end and a male straight thread O-ring boss on the other.
  • Forged steel for weldability, rust resistance, and durability.
  • For use with tubing that is flared 37 degrees for tight seal.
  • Operating temperature range from -63 to 400 degrees F.
Check Stock

5 Pack 45 Degree Ell Central Vacuum Fitting

  • 5 pack of central vacuum 45 degree elbow.
Check Stock

8Pcs Universal Aluminum Intercooler Piping U-Pipe Black Kit with T-Bolt Clamps and Black Coupler (8Pcs 3 Inch)

  • 3 Inch Upgrade Replacement Performance Turbo Charged Kit Made of High Quality Light Weight T6061 Aluminum.
  • Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI).
  • Perfect for All Turbo DIY Project,Increases Up to 65% Air Flow Compared to Standard Bent Piping.
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
Check Stock

28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock

EVIL ENERGY 6AN Straight Push Lock Hose Fitting End Black

  • Size: 6an female to 3/8" barb, and that of 6an thread size is 9/16-18UNF..
  • Material: made of aluminum alloy, reusable and recyclable..
  • Max pressure: 2000PSI, temperature range: -40℉ to 248℉..
  • Please attention that an6 push lock hose barb only compatible with rubber fuel line..
  • EVIL ENERGY provide 3 angles of 6an hose barb: straight, 45degree, 90degree..
Check Stock

MaxLine Rapid Air 45 Degree 1/2' NPT Pipe Thread Brass Street Elbow Fitting 50131

  • This is a solid brass street elbow that features 1/2" male NPT threads on one side as well as 1/2" female NPT on the opposite side..
  • This part is produced by RapidAir for the 3/4" MaxLine air piping systems outlets to install an air coupler at a 45 degree angle, but can be used for other applications as well..
  • 1/2" Threads Measure about 3/4" in diameter if measured with a tape measure..
Check Stock

Bykski Tools Kit Set for Water Cooling Rigid PETG Tubing Cut System Mandrels Heat Gun Saw File (14mm OD 45° 90° 180° PETG Bending Tool)

  • support outside diameter 12mm/14mm/16mm acrylic hard tube..
  • Use for 45 degrees, 90 degrees, 180 degrees bending..
  • When using, please put the preheated acrylic tube in the elbow mold for elbow treatment..
  • Do not heat the heat source directly to the elbow mold..
Check Stock

Craftsman CMXTEPA0018 Water Heater, Red

  • Warm to hot climates - serves up to 1-2 bathrooms | Cool to cold climates - serves up to 1 bathroom.
  • Requires a 240-Volt service with two 40 Amp double-pole breakers and two 8/2 AWG wires.
  • 35° F Temperature Rise – 3.7 GPM, 45° F Temperature Rise – 2.85 GPM, 55° F Temperature Rise – 2.4 GPM.
  • Digital control panel allows you to easily set the desired temperature up/down in increments of 1 degree F from 90 – 122 degrees.
  • Durable assembly with stainless steel, non-corrosive, lead free internal canisters and piping with standard 1/2 in. NPT (straight thread) fittings.
Check Stock