Best 45 Degree Stainless Elbow

Bosch Js365 Jigsaw Top Hndl 6.5A

• AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
• CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
• ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
• Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
• Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
• PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
• EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
• INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.

MaxLine Rapid Air 45 Degree 1/2' NPT Pipe Thread Brass Street Elbow Fitting 50131

• This is a solid brass street elbow that features 1/2" male NPT threads on one side as well as 1/2" female NPT on the opposite side..
• This part is produced by RapidAir for the 3/4" MaxLine air piping systems outlets to install an air coupler at a 45 degree angle, but can be used for other applications as well..
• 1/2" Threads Measure about 3/4" in diameter if measured with a tape measure..

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

• 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
• 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
• 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
• 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
• 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

• 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
• 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
• 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
• 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
• 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..

4 Pack 304 Stainless Steel Mandrel Bend Elbow, 90 Degree Exhaust Elbow Pipe, 2.5 Inch OD Mandrel Elbow, Thickness 16GA/.065" for Car Modified Exhaust Elbow Pipe, Stair Handrail, Exhaust System

• 2.5" Mandrel bend elbow suits for exhaust system, intake system, sanitary pipe connection, car modified exhaust elbow pipe, stair handrail, etc..
• 4 Pack x 2.5” Stainless Steel Mandrel Bend Elbow 90 Degree Bend Elbow..

Stainless 2.5' 45° Mandrel Bend Elbow - 1.5D/3.75' CLR Loose Radius - 16GA/.065' Wall - No Leg - SS304

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

• AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space.
• CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
• ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles.
• Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts.
• Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum.
• PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support.
• EASE OF USE: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw.
• INCLUDES: miter saw, (1) 12 inch 60-tooth carbide-tipped blade, (1) wrench, (1) toolless vertical work clamp, (1) dust bag and a vacuum adapter elbow.

Cenipar Washing Machine Hoses 4feet with 90 Degree Elbow Premium Stainless Steel Burst Proof (cost-effective 2 pack) Red and Blue Striped Water Connection Inlet Supply Lines

• PART NUMBER:Cenipar stainless steel washing machine hoses 4 foot with 3/4" 90 degree elbow. Red colored for Hot Water and Blue colored for Cold Water.The package list includes 2 x 4 feet Stainless Steel Washing Machine Hoses with 90 degree elbow. (Red - Hot Water & Blue - Cold Water).
• HIGH QUALITY:Washing machine hoses with 90 degree elbow is made of strong & durable 304 stainless steel materials.Designed to last, our hoses use stainless steel for braided outer protective cover which last incredibly long time for effective protection against rust and burst. Some other hoses may not use stainless steel for the braided cover and could result in rust even burst..
• USAGE: Fit To All washing Machine Brands and washing machine hose is very suitable for residential or commercial use. Connections on either end are flexible universal sasher hose, and easily connects to normal household water supply lines In US..
• EASY INSTALLATION :The heavy duty Stainless Steel Washing Machine Hoses are easy to install. It is take probably 10min to install the tire tubes.NO special tools!Save you money to fix your washing machine install....

Appliance Pros Washer Inlet Hoses 4 Foot

• ONE PAIR of 304 stainless steel braided premium washing machine hoses 8ft long each with 3/4" 90 degree elbow connection. Red lined for HOT water and....
• BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for....
• INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
• UNIVERSAL FIT - Our hoses connect to all washing machines with industry standard 3/4" 90 degree elbow FHT(Female Hose Threaded) or FGH(Female Garden....
• MONEY BACK GUARANTEE - We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality....