Best 4 Holes Led Supply

Scary Sounds of Halloween

  • ... high sensitivity motion sensor, which will be sync with the rhythm of Halloween spooky sounds. The total length is 114.8ft with dark green wire, which is large enough to cover the bush, fence or fireplace with a decent amount of lights. Approximately 16.4ft lead cable which is long enough to plug in the power supply from anywhere..
  • 【6 Smart Lights with Spooky Sounds Sync】 The orange & purple Halloween string lights have 6 lighting modes sync with spooky sounds, which is perfect for creating a creepiness atmosphere: ① combination – sync with spooky music 1 to 4.
  • ⑥ steady on lighting mode without any sound. To switch between the 6 lighting modes, you only need to press the button on the controller box..
  • 【Motion Sensor】 Built-in body passive infrared (PIR) motion sensor, and the motion sensor range is 16.4ft/5m. When someone approaches, the Halloween decorations light will play clear and loud spooky music automatically (except steady on lighting mode). If there is not any motion, they will automatically turn off after 20 seconds, and turn on instantly when actions detected. In steady on lighting mode, there is not....
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Note: If you use UPS to power Raspberry Pi3b/3B+ while charging, please make sure that the input power is not less than 2.5A. Recommended use: 3V 2.5A power supply★ The document link is obtained in the product description.
  • The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
  • The UPS has overcharge and overcurrent protection functions: When the UPS e....
Check Stock

The Haunted Mansion: Halloween Haunted House Music & Sound Effects

  • ... high sensitivity motion sensor, which will be sync with the rhythm of Halloween spooky sounds. The total length is 114.8ft with dark green wire, which is large enough to cover the bush, fence or fireplace with a decent amount of lights. Approximately 16.4ft lead cable which is long enough to plug in the power supply from anywhere..
  • 【6 Smart Lights with Spooky Sounds Sync】 The orange & purple Halloween string lights have 6 lighting modes sync with spooky sounds, which is perfect for creating a creepiness atmosphere: ① combination - sync with spooky music 1 to 4.
  • ⑥ steady on lighting mode without any sound. To switch between the 6 lighting modes, you only need to press the button on the controller box..
  • 【Motion Sensor】 Built-in body passive infrared (PIR) motion sensor, and the motion sensor range is 16.4ft/5m. When someone approaches, the Halloween decorations light will play clear and loud spooky music automatically (except steady on lighting mode). If there is not any motion, they will automatically turn off after 20 seconds, and turn on instantly when actions detected. In steady on lighting mode, there is not a....
Check Stock

Hunter good biometric gun safes for rifles and shotguns, gun security cabinet for rifles storage, quick access fingerprint gun safe for home, override keys

  • 1. Secure access system: Use of high-tech biometric panel ensure that your gun safe is highly burglar proof. Quick access fingerprint opening and combination code opening mode ensure you open safe quickly. 9 volt external power supply ensures that you can still open safe in inner power out mode. Override key is useful when the power is out and electronic system is locked..
  • 2. High security body construction and convenient use function: Unique appearance design. Reinforced and beveled safe structure prevents the body from being violently invaded. The body was made of low carbon alloy steel. Silent mode improves privacy. Inner Led light provide maximum convenience in dark environments..
  • 3. Maximum capacity: External dimensions: 57 (H) X 13.8 (W) X 11.8 (D). Inner separate lock box dimensions: 6.7 (H) X 13.6 (W) X 6.5 (D). Max capacity fit for 5 shotguns. Soft gun rack protects the barrel. Inner separate lock box provide individual storage space secure your handguns and valuables..
  • 4. Easy installation: pre-punched 4 anchor holes in the back and 4 anchor holes at the bottom easy for fixed on the wall or floor. Offered 4 anchor bolts..
  • 5. Professional service: A professional service team provides 24 hours professional service. If you have questions please fe....
Check Stock

Halloween Music & Scary Sounds: Scary Music For Halloween Night and Haunted House Music

  • ... high sensitivity motion sensor, which will be sync with the rhythm of Halloween spooky sounds. The total length is 114.8ft with dark green wire, which is large enough to cover the bush, fence or fireplace with a decent amount of lights. Approximately 16.4ft lead cable which is long enough to plug in the power supply from anywhere..
  • 【6 Smart Lights with Spooky Sounds Sync】 The orange & purple Halloween string lights have 6 lighting modes sync with spooky sounds, which is perfect for creating a creepiness atmosphere: ① combination - sync with spooky music 1 to 4.
  • ⑥ steady on lighting mode without any sound. To switch between the 6 lighting modes, you only need to press the button on the controller box..
  • 【Motion Sensor】 Built-in body passive infrared (PIR) motion sensor, and the motion sensor range is 16.4ft/5m. When someone approaches, the Halloween decorations light will play clear and loud spooky music automatically (except steady on lighting mode). If there is not any motion, they will automatically turn off after 20 seconds, and turn on instantly when actions detected. In steady on lighting mode, there is not a....
Check Stock

Dr.Acces Golf Cart Rear View Mirror with LED Turn Signal | Golf Cart Side Mirror with LED trun Signal Fits EZ-GO Club Car Yamaha etc Most Golf Cart

  • Universal Side Mirror with LED Turn Signal including Installation instructions, 180° extra Adjustable wide panoramic.
  • Installation Step 1:Find desired mounting location and mark with a marker. Drill 2 small 1/8” holes in strut for mounting hardware. Drill 1/4” hole for wire. Or run your wires down strut, secure wires using mounting ties..
  • Installation Step 2:Using a wire snake feed wires in through strut and out the bottom..
  • Installation Step 3: Loosen hardware to mount LED mirror Bracket using supplied hardware. Reattach mirror to bracket using hardware from and tighten at desired mirror location..
  • Installation Step 4: a.Up-plug head-light. Use a multi meter to find power and ground for the blinker. This will supply power to the LED mirror. To do this engage blinker on turn signal, the pin that shows 12V flashing is your blinker 12V(+). b.Attach Red wire to the wire found on the harness that showed 12V(+) flashing in step 3 using a Splice Wire Connector and secure.Re-attach harness to Headlight and repeat steps 1-7 on opposite side..
Check Stock

Sunstar Industries Light Up Animated Old Fahsioned Radio Halloween House Decoration with Music, 12 Inch

  • ... high sensitivity motion sensor, which will be sync with the rhythm of Halloween spooky sounds. The total length is 114.8ft with dark green wire, which is large enough to cover the bush, fence or fireplace with a decent amount of lights. Approximately 16.4ft lead cable which is long enough to plug in the power supply from anywhere..
  • 【6 Smart Lights with Spooky Sounds Sync】 The orange & purple Halloween string lights have 6 lighting modes sync with spooky sounds, which is perfect for creating a creepiness atmosphere: ① combination - sync with spooky music 1 to 4.
  • ⑥ steady on lighting mode without any sound. To switch between the 6 lighting modes, you only need to press the button on the controller box..
  • 【Motion Sensor】 Built-in body passive infrared (PIR) motion sensor, and the motion sensor range is 16.4ft/5m. When someone approaches, the Halloween decorations light will play clear and loud spooky music automatically (except steady on lighting mode). If there is not any motion, they will automatically turn off after 20 seconds, and turn on instantly when actions detected. In steady on lighting mode, there is not a....
Check Stock

2 pcs black 4 Pins LED Splitter Cable LED Strip Connector 4 Way Splitter Y Splitter for One to four RGB 5050 3528 LED Light Strips with 10x Male 4 Pin Plugs -30cm/12inch Long

  • ...nnection cable For - 5050/3528 RGB LED Extension Cable is designed for 10mm width LED strips.
  • 1 end to connect with LED RGB controller, the other ends for 4 Reel LED RGB strips.
  • This DC Power Adapter Cable splits 1 power signal into 4, enables you to connect 4color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 4 strips is required.
  • Package Content: 2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, perfect conductivity)DescriptionDesign: 1 to 4 Splitter Cable Connect four color changing RGB 5050/3528 LED strips to a single controller with this 4 pin splitter cable. No soldering is required, simply match the arrows on the plug. Features: 1). The insulation plastic of this cord adopts high quality PVC, anticorrosive. 2). This extension cord contains 4 strands of pure copper wires inside, which ensures flexibility, durability, and perfect electric conductivity. 3). The cord and the 4pin plugs fit snug. 4). Easy to plug, reliable connection, excellent performance. Just buy with confidence! Note: A power supply with sufficient power for multiple led strips is required. Package Includes:2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, per....
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Support charge while discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3b/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply. ★Document link and Assemble video: Please get the link from the product description below.
  • Two power modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm.
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Char....
Check Stock