Best 3sheet Metal Brake

Permatex 24110 Ultra Disc Brake Caliper Lube, 8 oz.

Green, nonmelting, environmentally-friendly, 100% synthetic lubricant.
Formulated to lubricate under the most adverse brake conditions, preventing seizing and sticking of disc brake components.
Assures that critical metal-to-metal contact areas remain lubricated throughout the pad life.
Temperature Range: -40°F to 400°F (-40°C to 204°C).
Suggested Applications: Caliper pins, hardware, and the back-side of brake pads.

Check Stock

TEKTRO M530 Linear Pull Brake, Black

Application: bike brakes kit,suitable for Children most bicycles,Height of break pad adjustable 20mm；See Figure 2 for detailed dimensions..
Material: The bike brakes kit is made of high-quality aluminum alloy, and the brake cable is also made of high-quality aluminum alloy. It is durable and can be used for a long time. It is resistant to cold, heat and oxidation, and is not easily deformed. It ensures that the brakes are sensitive and suitable for most weather conditions..
Product size: Front brake cable length: 55cm/21.65".
Rear brake cable length: 155cm/61.02".and the bicycle brake handle is suitable for handlebars with a diameter of 2.2 cm / 0.87"..
Easy to install: Quickly replace the old bicycle brake and tighten it with the corresponding brake fixing hole.
pass the brake wire through the brake wire tube in turn to fix the position of the metal wire tube.
then fix it on the bolt, install the brake pads, and adjust the distance of the brake wire , Position and length, and then fix the brake cable..
You will get: 2 pieces bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set.

Check Stock

KAKA Industrial Manual Hand Brake Solid Construction with Steel Frame Stand (MB-36)

Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
Bends sheet metal to 12 gauge (up to 18" wide), 16 gauge (up to 36" wide).
HIGH FLEXIBILITY CAN BE ACHIEVED THROUGH CHANGING THE BENDING ANGLE. The bending angel of this metal bending brake can rotate up to 120 degree. In a large extent, it will the adjustability of using this brake.
EASY OPERATION WITH UPPER AND LOWER HANDLE. This bending brake is very easy to operate. Both the upper handle and lower handle assist the operation of a project.
HIGH QUALITY BUILD AND CAN LAST FOR LONG TIME HEAVY USE. The compositions of this metal bending brake are solid heavy material that can last for long time operation. It would be a great purchase in term of long-term investment.

Check Stock

Tektro 984 Black Rear Caliper-Lever-Cable BMX Bicycle Brake Kit

You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
How to install: 1. crew the fixing hole of the brake corresponding to the body fixing hole.
2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.

Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.

Check Stock

VIVOSUN 2-Pack Plant Stand 14\ Heavy Duty Metal Plant Caddy Flower Pot Stand with Wheels

Powder Coated Welded Material: This flower pot holder is welded by hand.
The surface is treated with anti-rust powder.
Easy to Move: Equipped with 4 high-quality metal wheels, one of which has a brake.
Accessories Included: Metal wheel with brake * 1 + metal wheel without brake * 3 + wrench *1.
Firm Construction & Heavy Duty: This plant caddy has a load-bearing capacity of 130 pounds, and can hold large flower pots, vases, potted trees, other planters, wine barrels, heavy barrels.
Versatile Application: It is widely used in indoor living room, bedroom, balcony, outdoor corridor, garden, courtyard, deck.

Check Stock

Hotop V Bike Brake Pads with Hex Nuts and Spacers V Bicycle Brake Blocks Set 70 mm (Black)

Good design V bike brake pads: slightly curved design which does not hurt the wheel, and provide braking ability, effectively prevent diversion sand damage to wheel when braking.
Brake pad size: 70 mm/ 2.76 inch in length, 10 - 14 mm/ 0.39 - 0.55 inch in width and 38 mm/ 1.50 inch in height.
Lightweight and portable, convenient for riding a long journey.
Good quality and performance: the brake pad is made of hard-wearing rubber and metal, the twill water-leaking tanks of v brake pad will help stop power of your bike in most adverse weather conditions.
Versatile v type brake pads: suitable replacement for most v brake bikes, each pair V brake pads have left and right, please carefully read the text on the brake pads.
Package includes: totally 2 pairs v brake pads (4 packs).
Each piece of v brake pad comes with 1 piece hex nut and 5 pieces spacers.

Check Stock

2 Pairs V Bike Brake Pads with Hex Nuts and Spacers V Bicycle Brake Blocks Set 70 mm (Red)

Good design V bike brake pads: slightly curved design which does not hurt the wheel, and provide braking ability, effectively prevent diversion sand damage to wheel when braking.
Brake pad size: 70 mm/ 2.76 inch in length, 10 - 14 mm/ 0.39 - 0.55 inch in width and 38 mm/ 1.50 inch in height.
Lightweight and portable, convenient for riding a long journey.
Good quality and performance: the brake pad is made of hard-wearing rubber and metal, the twill water-leaking tanks of v brake pad will help stop power of your bike in most adverse weather conditions.
Versatile v type brake pads: suitable replacement for most v brake bikes, each pair V brake pads have left and right, please carefully read the text on the brake pads.
Package includes: totally 2 pairs v brake pads (4 packs).
Each piece of v brake pad comes with 1 piece hex nut and 5 pieces spacers.

Check Stock

ABN Brake Cylinder Hone – 1-1/8in 3 Stone Piston Honing Tool Cylinder Bore Hone with 3/4in to 2-1/2in Honing Range

...ts from your caliper and piston cylinder walls with the ABN | 1-1/8 Inch Cylinder Bore Honing Tool Small Engine Cylinder Hone Kit.
Compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders.
BUILT TO LAST: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity.
The flexible shaft and spread-control tension nut allow faster cutting and maneuverability.
3 stone design makes insertion easy by self-centering.
Stone sleeves add strength and protect your abrasive stones when not in use.
PERFECT SIZE FOR YOUR NEEDS: Rigid honing tools for a drill features 3 carbide stones that help you remove glaze build up on your brake cylinders.
220 medium grit stones measure at 1-1/8 by 3/16 by 1/8 inches (2.8 by .5 by .3cm).
Square ends of stones make this small brake hone tool ideal for step-cut and blind-end cylinders.
ADJUSTABLE RANGE: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface.
Spring and knurled adjusting nut increase tension and lock the drill hone metal arms in place while working.

Check Stock