Best 3d Printing Bed Adhesives

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
▌Long-lasting: PLA glue Lasts for 100+ average prints.

Check Stock

Creality TPU 3D Printer Filament 1.75 mm - Black | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance ±0.02 mm | Fit Most FDM Printers (1 Pc/Pack)

SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – Black | Dimensional Tolerance +/- 0.02 mm | Shore Hardness: 95A | Speed: 20-60mm/ | Recommended Nozzle Temperature: 215-235 ℃ | Recommended heat bed settings: No heat/ 60-80℃.
MATERIAL - With outstanding bed adhesion, no heated bed requirements, minimal warping, and abrasion resistance much higher than any other standard printing material, the uses and possibilities that TPU uncovers have revolutionized 3D printing for people around the globe..
UNIQUE FEATURES - Creality TPU 3D Printer filament is Soft adhesive with high elastic, Chemical resistance and environmental resistance, Waterproof and moisture proof and Environmental protection. The printing model is resistant to wear and scratch, with good aging resistance..
FIT MOST FDM PRINTERS - Creality TPU 3D printer filament is compatible with all FDM printers of Creality 3D, and you can create your artwork with this filament of high quality in just a few simple steps..
CHEMICAL RESISTANCE - TPU 3D Printer filament have Excellent chemical resistance (water resistance, oil resistance, solvent resistance) and environmental resistance, environmental protection, and nontoxic..

Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....

Check Stock

Doodler

ADVANCED 3D PRINTING: The Dremel Digilab 3D45 Idea Builder 3D printer is one of the best 3D printer options for printing advanced materials. It is....
BEST IN CLASS: The winner of PCMag.com’s 2022 Editors’ Choice Award for Best 3D Printer for Professionals and Small Businesses, a Google For....
EASY TO USE: Our guided setup process gets you from unboxing to printing in just a few minutes. The 4.5 inch full color touchscreen has an intuitive....
TOP RATED FEATURES: Features include an automated 9 point leveling sensor that detects any variation in the print bed and automatically accounts for....
THE DREMEL STANDARD: With over 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey.....

Check Stock

Coex Metallic Gunmetal Silver PLA 3D Printer Filament 1 kg Spool 1.75 mm Dimensional Accuracy +/- 0.03 mm

Great Sample Pack for 3D Pen and 3D Printer: Include 25 Unique Popular Silk Shiny Colors, Each Color 4 Meters Length, Perfectly For Silk PLA Sample....
25 Most Popular Silk Shiny Colors: 10 Silk Metal Colors: Silk Bronze, Silk Copper, Silk Silver, Silk Gold, Silk Gun-Metal, Silk Green Gold, Silk....
Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers and 3D Pen, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent....
3D Printer Test Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 215°C, To Avoid being Tangled, Insert Filament into Spool....
Extra Gift: 2 Silicone Finger Caps, To Protect Your Fingers During 3D Drawing or 3D Printing, It Support You to Make 3D Printing Much More Smoothly....

Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

...ng plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results..
【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service..

Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Cool White

【More easier & Smoothly & Odorless】JAYO is a sub-brand of SUNLU. JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry f....

Check Stock

USA Import Material 200x200mm 300W 24V Cube Flexible Silicone Heater Compatible with Voron V2.4 Prusa i3 RepRap 3D Printer Heated bed 24V

used for printing area 200x200mm 3D printer.
With 1meter NTC 100K 3950 thermistor for temperature Control. Power consumption: 300W. Attached with two pieces 1meter length power wire.
This heated bed is used with 200x200mm printing area 3D printers, but also compatible with Voron V2.4 3D printer which printing area is 250x250mm..

Check Stock

3D Print Removal Accessories– 3 Piece 3D Printing Removal Tool Kit – High Quality Tools to Remove Models from 3D Printers

EASY REMOVAL: Our tool kit ensures that you can easily lift – not pry – your models from the 3D printer print bed every time..
NO DAMAGE: The accessories allow fast and efficient removal of your 3D prints without damaging either the model or the print bed..
3 PIECE KIT: The 3D printing tools are designed to be used either separately or together to gently lift your prints, however small, large or delicate..
TOUGH & DURABLE: The high quality wooden handles are pinned to the blade to keep them firmly in position, for reliable results however tough your 3D print removal!.
AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your Removal Tool Kit just let us know!.

Check Stock