Best 3d Printers For Nylon

eSUN Carbon Fiber Filled Nylon Filament 1.75mm, PA CF 3D Printer Filament, 1KG Spool 3D Printing Filament for 3D Printers, Natural

...manual examination ensure tangling free and avoid filament breaking and snapping.eSUN Carbon Fiber Filled Nylon filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking..
【Wide Application】Compatible with most of FDM 3D Printers that use 1.75MM filament and suitable for making both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.Recommend Carbon Fiber Nylon filament extrusion / Nozzle temperature 260℃-290℃, bed 45℃-60℃.Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles..
【Stable Dimensional Tolerance】3D printer filaments are produced with high precise specification and have a tolerance of only +/- 0.05mm. Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance.Minimum tolerance and low warping to ensure consistent feeding and stable prints..
【100% Vacuumed Sealed Packaging】Complete drying for 24 hours before packaging, eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and prevent from dust and foreign particles, avoid nozzle jams and yield smooth....

Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts.
Extrusion nozzle temperature: 230 - 260 C.
Recommended to use a heated build platform.
1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..

2.1 lb of 3mm Nylon 3D printer filament | Similar to Taulman Bridge Nylon.
Filament diameter is 2.85mm +/-0.05mm, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1.
Printing Temperature range is 245 - 260C | Bed Temperature 40C - 70C.
Made in the USA under strict quality standards.
Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.

Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts.
Extrusion nozzle temperature: 230 - 260 C.
Recommended to use a heated build platform.
1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..

3-in-1 3D Printers&Larger Work Area: Snapmaker 2.0 3-in-1 3D Printer A350T integrates the functions of 3d printing/laser engraving/CNC carving to comes with your more creative needs and unlocks your full creative potential. A350T 3D Printers offers a larger work area of 320*350*330mm, which is capable of making much bigger prints or multiple smaller objects in one go..
Noise Reduction Chip&Smart Auto Leveling: With the new A350T Linear Modules, the noise gets reduced substantially, thanks to the TMC 2209 stepper motor driver chips embedded. Snapmaker 3D printers offers an induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without complicated operations by yourself..
Filament Runout Recovery&Power Loss Recovery: A350T 3D printers can automatically detect power loss, and then resumes exactly where it left off. You can recover any project and get perfect results all the time, don't worry about power outages anymore. Equipped with a filament runout sensor, A350T Smart 3D printers will remind you when the filament has run out. You can now print large objects without fe....

Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts.
Extrusion nozzle temperature: 230 - 260 C.
Recommended to use a heated build platform.
1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..

Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts.
Extrusion nozzle temperature: 230 - 260 C.
Recommended to use a heated build platform.
2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..

★【Printing conditions】We recommend print the Nylon filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C.Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
★【Unique Package】Our packaging is vacuum sealed with semi-aluminum foil bags,which can better isolate air and water molecules.We use a transparent plastic film to adhere to the surface of the box by hot pressing, so that the periphery of our box has a waterproof function!Unique packaging gives our material a double Waterproof protection!.
★ 【Tips】Please make sure your 3d printer filament is no tangle before you use it.Please keep the 3D printer filament in a sealed bag after each print, and seal the bag tightly to prevent moisture.Be sure to insert the free end of the filament into the hole to avoid tangling for the next use.If there is no printing plan in a few days, retract the filament to protect the printer nozzle..

...ECH are very grateful to many professional users who have provided us with a lot of valuable information to create this 3D printer dedicated to printing carbon fiber and high-temperature nylon filaments..
【QIDI TECH Service】QIDI TECH are committed to making valuable 3d printers. X-CF Pro is suitable for professional users as well as novice users.No assembly,out of the box. It is easy to print according to the operating instructions. The highly praised service of QIDI TECH is the most trustworthy. 2 year warranty(1 year + 1 extra year)..