Best 3d Printer With Large Build Volume

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Silver) Bundle

  • Eco-Friendly & Wide Compatibility, Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing..
  • Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
  • Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
  • Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress..
  • Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.
Check Stock

MakerBot Replicator + 3D Printer, with swappable Smart Extruder+, Black (MP07825EU) & MP06572 Large 10-Pack PLA Filament, Spool, 1.75 millimeters Diameter (Pack of 10)

  • Your purchase includes One MarkerBot Replicator, One 3D Printer with swappable Smart Extruder+ in Black, 1 PLA spool, 1 flexible build plate, power and USB cables.
  • Item's dimensions – 17.4" W x 20.8" L x 16.2"H | Build volume – 7.6” W x 11.6” L x 6.5” H / 573 Cubic inches | Power requirements – 100-240 V, 50-60 HZ | Material diameter – 0.069” | Camera Resolution – 640 x 480 | Operating Temperature – 60-90°F].
  • Works with MakerBot PLA Material - Large Spool, Small Spool & MakerBot Tough Material - Large Spool, Additional materials such as bronzefill, copperfill, and woodfill.
  • The only 3D printer tested by NIOSH for environmental safety in the classroom or office space.Aluminum Casting and Extrusions for Motion Components.
  • Item Package Dimension: 18.0" L x 10.0" W x 10.0" H.
Check Stock

ANYCUBIC Vyper Upgrade Intelligent Auto Leveling 3D Printer with TMC2209 32-bit Silent Mainboard Removable Magnetic Platform Large 3D Printers with 9.6 x 9.6 x 10.2 Printing Size

  • Upgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with....
  • Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 24.5 x 24.5 x 26cm, which leaves....
  • Fast and Stable Printing: Compared with ordinary 3D printers, Vyper's max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on....
  • Durable and Removable Magnetic Platform: ANYCUBIC Vyper's platform adopts a special coating combined with spring steel, you can remove the models....
  • Intelligent Resume Printing Function: Vyper 3D Printer supports automatically resume printing when Power off or the filament is insufficient or....
Check Stock

FlashForge Adventurer 4 3D Printer Auto-Leveling Platform,Quick Removable high Temp Nozzle,Camera remotely Monitor,Print Size 220 x 200 x 250 mm W/1 Free Spool PLA

  • Upgrade Auto Leveling: ANYCUBIC Vyper is one of the very few 3D printers that has auto leveling feature, the intelligent leveling system equipped with....
  • Large Printing Size: ANYCUBIC Vyper 3D Printer comes with a large build volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 24.5 x 24.5 x 26cm, which leaves....
  • Fast and Stable Printing: Compared with ordinary 3D printers, Vyper's max printing speed can reach 7.1 in/s / 18 cm/s, which save more time on....
  • Durable and Removable Magnetic Platform: ANYCUBIC Vyper's platform adopts a special coating combined with spring steel, you can remove the models....
  • Intelligent Resume Printing Function: Vyper 3D Printer supports automatically resume printing when Power off or the filament is insufficient or....
Check Stock

ANYCUBIC Kobra 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Silver) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
  • Upgrade Auto Leveling: ANYCUBIC Kobra is one of the very few 3D printers that has auto leveling feature, the intelligent Anycubic LeviQ Leveling Function equipped with 25-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate.
  • Fast Printing & Large Printing Size: ANYCUBIC Kobra 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.66x8.66x9.84in / 220*220*250mm, which has enough space and freedom to realize your fantastic creativity..
  • Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
  • Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
Check Stock

ANYCUBIC Kobra 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Black) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
  • Upgrade Auto Leveling: ANYCUBIC Kobra is one of the very few 3D printers that has auto leveling feature, the intelligent Anycubic LeviQ Leveling Function equipped with 25-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate..
  • Fast Printing & Large Printing Size: ANYCUBIC Kobra 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.66x8.66x9.84in / 220*220*250mm, which has enough space and freedom to realize your fantastic creativity..
  • Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
  • Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
Check Stock

ANYCUBIC Kobra 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Blue) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Blue.
  • Upgrade Auto Leveling: ANYCUBIC Kobra is one of the very few 3D printers that has auto leveling feature, the intelligent Anycubic LeviQ Leveling Function equipped with 25-point precise pressure strain gauge, which can adjust the uneven hotbed automatically, greatly simplifies your print preparation and improves your print success rate..
  • Fast Printing & Large Printing Size: ANYCUBIC Kobra 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.66x8.66x9.84in / 220*220*250mm, which has enough space and freedom to realize your fantastic creativity..
  • Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision..
  • Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost..
Check Stock

ANYCUBIC MEGA X 3D Printer Large Metal FDM 3D Printer with Patented Heatbed and PLA Filament Build Size 11.81in L X 11.81in W X 12in H

  • Fast Assembly, Mega X 3D printer came in two modules and all it takes is to plug in 12 screws and 3 cables, easy to assemble and get printing right....
  • High Print Precision, This 3D Printer’s print precision is greatly improved by equipping it with Y Axis Dual Sideway Design and Z-axis dual screw....
  • Large Build Volume, This FDM printer comes with larger build spaces available, At 11.81in(L) x 11.81in(W) x 12in(H), able to print models that 90% of....
  • Patented Heat Bed, No hassle of sticker any more, Ultrabase bed surface coated with patented microporous coating, allowing the print holds strong when....
  • More Function, Resume Print: One click to resume from the last recorded position when suffered power outages, TFT Touch Screen: As responsive as....
Check Stock

ELEGOO Mars 3 MSLA 3D Printer Machine UV Photocuring LCD Resin 3D Printers with 6.66 inch 4K Mono LCD and Upgraded COB UV Light Source Printing Size 143.36mm x 89.6mm x 175mm

  • "Add both to Cart" to Get 500G resin free.【Better Printing Accuracy & Faster Printing Speed】 Mars 3 3D Printer comes with a 6.66-inch 4K Monochrome LCD screen with a resolution of 4098*2560px. The printing speed is 1.5-3s per layer.It has a large build volume of 89.6mm*143.36mm*175mm. Compared with Mars 2, the printing accuracy has increased by 30%, and the printing volume has increased by 37%..
  • 【Upgraded COB UV Light Source】 Mars 3 is equipped with a new free-form surface COB light source, and the light uniformity exceeds 90%. It is the first time to adopt a copper tube heat dissipation structure, and the heat dissipation efficiency is increased by 50%. The light decay is less than 5% after 6000 hours of continuous printing, which greatly extends the service life..
  • 【Excellent Build Quality】 Z-axis solid liner guide structure has better stability with an accuracy of 0.001mm .The sandblasted build plate provides much stronger adherence and makes the model not easy to fall off during printing..
  • 【Upgraded FEP Film 2.0】 The FEP film is upgraded to version 2.0. Compared with 1.0, 2.0 has lower release tension and protects small supports from being broken, which improves the integrity of model details and the success rate of printing..
Check Stock