Best 38pin Cable

Molex Micro-Fit 3.0 Dual Row (8 Circuits) Male & Female Receptacle Plug, w/Terminal sockets, (Pack of 1 Complete Set)

  • Package Content : 1 x 8 Pin Waterproof Connector Set.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check Stock

My Mighty Majic Stick

  • Compatible Models: For Yamaha Golf Cart G2-A 1985-1991 G8-A Fleet Classic 1990-1994 G9-A Fleet Master 1991-1995 G11-A Yamahauler 1993-2001 G14-A Ultima 1995-1996 G16-A Ultima 1996-2001 G19-E Ultima 1996-2001 G20-A Concierge 2000-2002..
  • Replacement Part: J38-23527-00, J38-23528-00, 90384-15825, 90384-15826, 90201-156J2, 90334-19800.
  • Package: 2* King Pins, 2* Upper King Pin Caps, 2* Upper King Pin Bushings, 2* Lower, King Pin Bushings, 2* Steering Knuckle Dust Seals, 2* Bottom King Pin Dust Seals.
  • Pre-Buy Tips and After-Sale:Please refer carefully to our applicable model numbers, pictures and OEM numbers to determine if applicable before purchasing. If you have any questions during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we provide you with a comprehensive quality assurance..
Check Stock

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
  • Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
  • Designed for intense Gamining and BitCoin Mining.
  • Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
  • Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
  • How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..
Check Stock

obd1 to obd2 Adapter,for GM OBD1 12 Pins to OBD2 16 Pins Diagnostic Tool Connector Adapter Cable

  • 【Specifically for】Car Diagnostic Extension Cable has high practicality, which is used specifically for connecting your scanner and your vehicle, specifically for GM vehicles.Please note that this item is just a cable, not a scanner or diagnostic tool..
  • 【Product Specification】Type: cables, adapters & sockets, connector: GM 12 pins male, connector.
  • OBDII 16pins female connector, car maker: Compatible with GM, item length: 41.5cm / 16.3", package weight: 102g..
  • 【Standard Specification】OBD1 12 Pins to OBD2 16 Pins Conform to strict quality control standards,12 Pins to 16 Pins Diagnostic Cable dependable to use.Car 12 Pins To 16 Pins OBD Cable Manufactured according to the original specifications.Built to meet standard specification,GM 12 Pins To 16 Pins Cable strictly follow factory quality control..
  • 【Easy to Use】12 Pin to 16 Pin OBD1 OBD2 Connector Adapter Cable is easy to use, its GM 12 pins allows you to connect a GM vehicle with a OBD1 12 pins socket with your existing OBD2 16 pins tool....
Check Stock

4.5 Feet DB 9 Pin Male to VGA 15 Pin Male Adapter Cable RS232 to VGA Conversion Cable YOUCHENG, for Computer,Printers Scanners

  • The DB 9-pin to VGA 15-pin adapter cable is a special adapter cable Some video devices are 9-pin, but our graphics cards are all 15-pin, so this cable....
  • Using polyethylene, HDPE inner insulation, high-fidelity design, strong anti-interference ability, reduced transmission signal attenuation, and good....
  • This adapter cable is only used to pass RGB signals through the 15-pin connector of the RGB to VGA converter. It cannot directly convert these RGB....
  • The adapter cable from DB 9-pin to VGA 15-pin is suitable for computers, notebooks, projectors, KVM switches and other video displays..
Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

  • 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
  • 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
  • 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
  • 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
  • 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Check Stock

OBDII 6Pin 9Pin J1708 J1939 Cable for Truck

  • OBDII female to 6pin+9Pin truck diagnositc connect cable.This cable is compatible with many of Heavy Duty turck diagnostic tools..
  • OBD 6+9Pin Heavy Duty Truck diagnostic cable is in 6Pin+9pin Male(J1978+J1739) to OBDII 16Pin Female. This OBD 6pin+9pin truck cable is ok for most....
  • This OBD 6pin+9pin Heavy Duty Truck diagnostic cable is used for connecting your OBDII scanner to heavy duty truck with J1708 6Pin and J1939 9Pin....
  • Tips:Please make sure your device or scanner must have 16 pin MALE plug and MUST be able to read J1708 or CAN/J1939 and detailed (PINOUT) in picture....
  • Quality:Cables tested 100%. If anything, please contact with us priority and then have a further discussion. Thanks..
Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

  • ✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
  • ✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
  • ✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
  • ✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
  • the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
  • ✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
  • it is designed for enthusiasts with need for controlling numerous system fans..
Check Stock