Best 30mm Scope Rings

Wheeler Scope Mounting Combo Kit with FAT Wrench, Alignment and Lapping Bars, and Storage Case for 1 Inch and 30mm Rings

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" & 30mm scope ring lapping bars, 1" & 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock, and Wheeler PRLS Reticle Leveling System.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope, adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings, the barrel clamp level features non-marring pads to ensure no damage is done at the contact points.
  • ACCURACY: Reticle leveling is a key component for the accuracy of a scope set up- the Level-Level-Level helps you to do so properly.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | Low Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings with Integrated Level Bubble | 30 mm Diameter | High Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

BARSKA CO11492 Colorado Rifle Scope 3-9x40 30/30 Reticle with Rings, Black

  • Precision Aiming: The 3-9x magnification scope features 1/4 MOA click adjustments for precision accuracy..
  • Quality Construction: The scope comes with 1" tube amd fully-coated optics, providing impressive viewing clarity..
  • 30/30 Reticle: The scope comes with 30/30 crosshair reticle for easy targeting, ideal for any type of shooting..
  • Parallax Free: The scope is parallax free at 100 yards, making it easy to target at closer range..
  • Robust Design: The scope is built with extra-rigid construction, being waterproof, fogproof, and shockproof..
  • Made to provide target shooters and hunters with firing precision and in-field dependability at affordable price.
  • 12.04-37.35ft Field of View at 100 yards.
  • ¼ Inch click value on side adjustment knobs for windage and elevation.
  • Comes complete with scope caps, mounting rings and lens cloth.
Check Stock

Monstrum Offset Cantilever Picatinny Scope Rings | 1 inch Diameter | Flat Dark Earth

  • The WH212 scope rings position the center of the scope tube at a height of 36 mm from the base, fits 1 inch, 30 mm and 34 mm tube optics.
  • Fits 20mm Picatinny rails and Weaver rails, net weight 153g(5.4oz).
  • Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a colorful anodizing for unique appearance, passed rigorous accuracy and stability tests.
  • Disadvantage and Warranty: Due to the different lighting environments, there are slight differences between real objects and pictures. We provide a lifetime warranty for this product.
Check Stock

Vector Optics Frenzy-S 1x16x22mm Tactical Reflex Mini Red Dot Sight with MAG-S Footprint, Red Illuminated Reticle, 3 MOA Dot Size, Automatic Light Sensor

  • scope level bubble 30mm scope mounts anti cant device level.
  • 30mm Diameter ACD Mount 30mm scope rings.
  • 100% avoid CANT One Piece Skeleton Style ACD Scope Mount.
  • 6 Bolts per Ring, Full Metal, w/25.4mm 1" adapter, half ring w/ picatinny rail.
Check Stock