Best 30 Adjustable Time Delay

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting..
【Light Sensor Adjustable】: This function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20 lux, when the room ambient light value is above 20 lux, the light won’t turn on, but when room ambient light value is less than 20 lux, the sensor can turn light on when motion detected within sensing range..
【Delay Time Adjustable- Please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it..
【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting..

Check Stock

Motion Sensor Flood Light Outdoor,10W Security Light, IP66 Waterproof Outdoor Light,1000LM,3200K Motion Security Lights with Plug for Garage Yard Patio Pathway Porch Entryways (Warm White)

1. Our products have been certified by FCC. CE. ROSS. and adopt 20 SMD3030 lamp beads, ultra-high brightness energy-saving LED chip technology, uniform luminous surface and human body induction function, detection distance 8-12 meters (adjustable), detection range 120 degrees, delay time 6 seconds to 10 minutes (adjustable), the best installation height is between 1.8 meters to 2.5 meters..
2. LUX is to adjust the working time during the day or night , when the position of the sun is adjusted: the sensor works all day. When the position of the moon is adjusted, the sensor does not work during the day and automatically enters the working state at night. TIME is to adjust the delay time of the sensor: the delay time refers to the time when the sensor senses to the person and the person leaves the induction area. SENS is to adjust the sensitivity of the sensor. When installing, pay at.
3. The waterproof grade of this product can reach IP66 waterproof grade, 120 degree beam angle, no shadows, anti-glare, and provide bright light..
4. The product has a wide range of uses: suitable for landscape lighting such as gardens, gatherings, streets, underground garages, gardens, buildings, courtyards, etc..
5. Our company solemnly promises that the warranty period is ....

Check Stock

Pixel Timer Shutter Release TW283-N3 Wireless Remote Control for Canon 5D Mark III/ 5D Mark IV/ 5D 6D /7D Mark II/ 7D 50D 40D 30D D60 D30 1DX MARKII

..., 1Ds, 1Ds Mark II, 1Ds Mark III, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 5D Mark III, 5DS, 5DS R, 5D Mark II, 5D Mark III,5D Mark IV,5D, 6D, 6D Mark II, 7D Mark II, 7D, 50D, 40D, 30D, 20D, 10D, D60, D30, D2000, EOS 1V, EOS 3.
TW-283 support Auto-focus, Single shooting, Continuous shooting, BULB shooting, Delay shooting and Timer schedule shooting. Delay Shooting Setting can set delay time and number of shots: delay time alters from 1s to 59s, and number of shots alters from 1 to 99..
Timer schedule shooting 1.timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments: interval timer, long exposure timer (it can use interval timer and long exposure simultaneously) and repeat timer schedule interval time.
2. Number of shots can be set from 1 to 99.
3. Repeat times can be set from 1 to 99..
When capturing the beautiful moments of sunrise and sunset and flowers bloom and fade , you don't need to wait for the whole time . You can set delay timer,exposure time, interval time, number of shoots, repeat shooting interval time and repeat times. It features no directionality, 80M+ remote distance and ultra- powerful anti-interference ability. With 30 channels for options,it can avoid interference caused by other similar ....

Check Stock

Pixel TW-283/N3 Wireless Shutter Remote Release Control for Canon 5D Mark III/ 5D Mark IV/ 5D 6D /7D Mark II/ R5 7D 50D 40D 30D D60 D30 1DX MARKII

..., 1Ds, 1Ds Mark II, 1Ds Mark III, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 5D Mark III, 5DS, 5DS R, 5D Mark II, 5D Mark III,5D Mark IV,5D, 6D, 6D Mark II, 7D Mark II, 7D, 50D, 40D, 30D, 20D, 10D, D60, D30, D2000, EOS 1V, EOS 3.
TW-283 support Auto-focus, Single shooting, Continuous shooting, BULB shooting, Delay shooting and Timer schedule shooting. Delay Shooting Setting can set delay time and number of shots: delay time alters from 1s to 59s, and number of shots alters from 1 to 99..
Timer schedule shooting — 1.timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments: interval timer, long exposure timer (it can use interval timer and long exposure simultaneously) and repeat timer schedule interval time.
2. Number of shots can be set from 1 to 99.
3. Repeat times can be set from 1 to 99..
When capturing the beautiful moments of sunrise and sunset and flowers bloom and fade , you don't need to wait for the whole time . You can set delay timer,exposure time, interval time, number of shoots, repeat shooting interval time and repeat times. It features no directionality, 80M+ remote distance and ultra- powerful anti-interference ability. With 30 channels for options,it can avoid interference caused by other simil....

Check Stock

Donner Tap Delay Guitar Effect Pedal, 3 Delay Modes Digital Reverse Analogue Delay with Tap Tempo Control

[3 Delay Modes] Including analog, digital, and reverse delay, Tap Delay gives you options for classic echo and thick ambient tones..
[Adjustable Delay Pedal] Use the standard LEVEL, FEEDBACK, and DELAY knobs to dial in your perfect echo..
[Tap Tempo Delay Pedal] Tap Tempo function for instant delay time control..
[Buffer Bypass] Buffer bypass provide transparent tone, LED indicator shows the working state..
Notice: DC 9V Adapter power supply. (NOT INCLUDED).

Check Stock

Pentax Wireless Remote Control C

1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds..
2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached..
3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long..
4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times..

Check Stock

AC100V~250V Infinite Cycle Delay Timer Timing Switch Relay Turn On Off Module 0.5s ~ 1000min Adjustable Time Delay Switch

【Simple Operation】Timer module enters into an infinite cycle mode when power on, and stops working automatically after the setting time, easy to....
【Adjustable】Relay timer has 0.5s~1000min wide adjustable time range, you can adjust the delay time both at "RUN" time and "STOP" time.
【Practical】The repeat cycle timer module can be used to control the reciprocating stroke, or repetitive power on and off for equipment and....
【Application】The delay timer module is suitable for timer operating equipment, machine repetitive test circuit and fish tank intermittent pump.
【Product Parameter】AC100V~250V voltage, delay timing timer relay switch can be used for 100V/110V/ 120V/ 127V/220V/230V/240V power.

Check Stock

UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot

Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..

Check Stock

UCTRONICS DC 12V Time Delay Relay Module with Plastic Enclosure, On Delay and Off Delay for Automobile, Raspberry Pi, Industrial Control, and Other Electronic Projects

Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
You'll Be Getting: A time delay relay module U6031, 2 pieces of protective case and 2 mounting screws.
the plastics case keep the module free from dust and water, which is available for more applications than the separate module..

Check Stock