Best 3 phase Multi function Current Equipment

Juried Engineering CD4046BE CD4046B CD4046 CMOS Micropower Phase-Locked Loop Breadboard-Friendly IC DIP-16 (1 Piece)

  • The HMC830LP6GE is a low-noise, wideband, fractional-N phase-locked loop (PLL)..
  • The HMC830LP6GE features industry-leading phase noise and spurious performance at all frequencies to minimize blocking and improve receiver sensitivity and transmitter spectral purity..
  • The device's outstanding performance makes it a multi-channel, rural standard wideband transceiver. Ideal for devices..
  • Chip features RF Bandwidth: 25-3,000 MHz Phase detector maximum speed: 100 MHz Ultra-low phase noise: -110 dBc/Hz (in-band typical) Quality Factor (FOM): -230 dBc/Hz (integer) 40-pin 6 x 6 mm SMT Package: 36mm.
  • Chip application honeycomb 4G infrastructure/repeaters and femtocells Communication Test Equipment Cable TV equipment phased array application Very high data rate radio Tunable Voltage Reference with Spurious-Free Performance.
Check Stock

3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

GRV8-03 Monitoring Relay, 176V-552V Ultrasmall Three Phase Voltage Relay Voltage Monitoring Relay Adjust for Mobile Device Connection Control(M265)

  • ...system and other industries, very helpful tool during daily life.
  • Work Well: DPA51CM44 3-Phase Monitoring Relay features with strong anti-interference performance, so it helps maintain a constant and efficient work of the motor, it will provide an excellent performance during the working process.
  • 3-Phase Design: This Current Monitoring Relay is designed with 3-Phase Monitoring Relay to provide a correct phase sequence, without neutral, phase Loss and Incorrect phase sequence, so it can detect when all phases are present and have the correct sequence.
  • LED Indication: This DPA51CM44 Monitoring Relay features an LED indication for easier installation and trouble shooting, which permits a maximum degree of protection to be achieved for machines, plants and systems, and avoid far more significant subsequent damage, very convenient and useful.
Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Fluke 378FC AC/DC TRMS Non-Contact Voltage Wireless Clamp w/PQ Indicator & iFlex

  • Measure voltage and current with your clamp jaw.
  • Faster, safer testing - all without touching a live wire - using FieldSense technology.
  • Complete 3-phase voltage and current tests with fewer steps.
  • Power quality indicator shows whether equipment or power line is faulty (378 FC).
Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

  • ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
  • Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock