Best 28mm Nozzle

3M Accuspray Atomizing Head, 16609, Red, 2.0 mm, 4 per kit

Use this 2.0mm atomizing head with any 3M Accuspray Replaceable Nozzle Series Spray Gun – Current models include: HG18, HG14, HGP.
Traditionally the 2.0mm atomizing head will be used for high viscosity coatings, with the use of the Model HGP (Pressure) Spray Gun.
Model HGP (Pressure) spray gun uses PPS H/0 Pressure Cups (6oz or 28oz available).
Works with all solvent-based and waterborne materials.

Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....

[Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
[Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
[Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
[Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
[Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.

Made of PP material and 304 stainless steel. All parts that contact food directly are reach up SGS food hygiene standard.
4 different diameter nozzle (Φ13 mm, Φ18 mm, Φ23 mm, Φ28 mm), which can make different sizes of sausages and salamis.
The sausage machine is easy to disassemble, removable design is convenient for you to clean.
Upright design with a 2.2 lb capacity, ideal for family gatherings, daily cooking use, enjoying homemade fun.
Included components: Stuffer, Stuffing Tubes (4), brushes(2), and cotton thread.

Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).

3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
When you use 3D printer nozzle brush to....
Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....

Flow Rate: 1.2 L/S with automatic flow regulator.
Supplied with nut, washer nozzle output and American Board for tube 28 mm device built-in antisifnico.
Dynamic Pressure Minimum you need to input the fluxor: 0.900 bar interchangeable piston that includes the whole mechanism of fluxor.
Body and Trim Material in chrome-plated brass, internal parts are resistant to corrosion and limescale.
Gross weight: 0.530 kg Noise Level Category II according to regulations in 200.

Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....