Best 22heater

Lasko Oscillating Digital Ceramic Tower Heater for Home with Overheat Protection, Timer and Remote Control, 22.75 Inches, 1500W, White, 5165

  • ✅【2 QUIET HEAT SETTINGS & ADJUSTABLE THERMOSTAT】This electric space heater features simple electronic controls and an easy to read digital display. Select from 2 heat settings (high 1500 watts / low 900 watts), plus a thermostat-controlled setting, it heats your space quickly and quietly..
  • ✅【MULTI-FUNCTION REMOTE CONTROL】Use the 5-function remote control to turn the heater on/off, select the speed, adjust the temperature, set the timer, or turn on the oscillation from a distance. Plus, there is storage for the remote on the back of the heater.
  • ✅【8-HOUR AUTO-OFF TIMER】The convenient timer mode on this portable space heater allows you to select 1 to 8 hours for your heater to run, then automatically turn off..
  • ✅【WIDESPREAD OSCILLATION】This 1500-Watt space heater features an optional oscillation function. The Patented comfort system and widespread oscillation project heat into the room for maximum comfort and warmth..
  • ✅【BUILT-IN SAFETY FEATURES】Features overheat protection with a safer ceramic element designed to automatically regulate its operating temperature. The exterior heater housing stays cool to the touch and has a built-in carry handle, so you can move it safely from room-to-room. This heater is ETL list....
Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

  • 【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
  • 【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
  • 【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
  • 【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
  • 【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

CORISRX 150w/300w/500w in-Line External Heater Aquarium Heater - 150/300/500 WATT 1/2 ,5/8 Applied to Both Sizes Black 150 Watt 5/8 ,1/2 Hose

  • Power: 150W, Applied sizes: 5/8"(16/22mm), 1/2"(12/16mm), can be applied to both sizes.
  • The in-line external heater is designed for vertical use in most aquarium applications involving water hose of the specified diameter..
  • The most common application is for use with canister filter, however the External Heater is easily adapted for use in almost any situation where....
  • The External Heater is completely safe and UL Listed..
  • There is no danger of damage if the External Heater is left running dry for short periods as the ISTA External Heater will switch itself off in that....
Check Stock

CORISRX 150w/300w/500w in-Line External Heater Aquarium Heater - 150/300/500 WATT 1/2 ,5/8 Applied to Both Sizes Black 500 Watt 5/8 ,1/2 Hose

  • Power: 500W, Applied sizes: 5/8"(16/22mm), 1/2"(12/16mm), can be applied to both sizes.
  • The in-line external heater is designed for vertical use in most aquarium applications involving water hose of the specified diameter..
  • The most common application is for use with canister filter, however the External Heater is easily adapted for use in almost any situation where....
  • The External Heater is completely safe and UL Listed..
  • There is no danger of damage if the External Heater is left running dry for short periods as the ISTA External Heater will switch itself off in that....
Check Stock

CORISRX 150w/300w/500w in-Line External Heater Aquarium Heater - 150/300/500 WATT 1/2 ,5/8 Applied to Both Sizes Black 300 Watt 5/8 ,1/2 Hose

  • Power: 300W, Applied sizes: 5/8"(16/22mm), 1/2"(12/16mm), can be applied to both sizes.
  • The in-line external heater is designed for vertical use in most aquarium applications involving water hose of the specified diameter..
  • he most common application is for use with canister filter, however the External Heater is easily adapted for use in almost any situation where heated....
  • The External Heater is completely safe and UL Listed..
  • There is no danger of damage if the External Heater is left running dry for short periods as the ISTA External Heater will switch itself off in that....
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover + L&R End Caps)

  • Baseboarders Elliptus Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length..
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseb....
Check Stock

Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (3 ft, Cover + L & R End Caps)

  • Baseboarders Premium Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboar....
Check Stock