Best 220v Heater

iSonic® Ultrasonic Brass and Gun Cleaner P4820-WSB25 with 25 min. Timer, Heater and Stainless Steel Wire Mesh Basket, Brass Cleaning Solution Concentrate-1Qt

25 min. digitial timer with 5 settings: 5, 10, 15, 20, 25 minutes.
Large tank size: 9.6"x5.9"x3". Tank capacity 2.6 Qt / 2.5 L..
Power: 110V 160W including the heater. (220V available with extra charge) Ultrasonic frequency: 35,000 Hz..
Come with a full size stainless steel wiremesh basket..
Warning: Do not use liquid bleach in the s.s. tank and corrosive solvents..

Check Stock

New RODWIL Electric Tankless Water Heater Instant Endless Hot Water 11KW at 220V 2.9GPM 37500 BTU hr at 11KW 42900 BTUhr at 12.6KW

Electric Tankless Water Heater Instant Hot Water 11KW 220V 12.6KW @ 240V.
Tankless water heaters provide a continuous Supply of hot water and only heats the water you need, when you need it.
Instant, consistent and endless hot water.
The unit will adjust how much energy needs to be input based on how much hot water is needed.

Check Stock

Waxkiss Roll On Wax Kit,Roll On Wax Warmer Kit For Hair Removal,Roller Waxing Kit For Sensitive Skin With 2 Roll On Wax Cartridge At Home Waxing Kit For Body Hair Removal (purple)

Roll on wax kit is easy to operate and portable wax roller warmer, suitable for individuals and families,perfect for both professional use or personal use..
It takes only 15-20 minutes to completely melt the roll on wax refill,the professional Wax Warmer has a comfortable, ergonomic hand-piece for smooth wax application..
The roll on wax warmer kit with 2 wax on cartridge . The roll on wax refill is made of natural, non-toxic rose oil. The honey wax box is made of natural, non-toxic honey, both of which can provide gentle and soothing care for the skin, are friendly to the skin, and are suitable for sensitive skin, arms, legs, and larger areas of the body hair removal, with results last up to 4 weeks..
The wax heater use for 110V to 220V is available,adjust the temperature ,Range：35-95℃（95-203℉）.
Waxkiss Roll on wax kit including: 1x Wax Cartridge Heater； 2x Wax Cartridge； 100 x Waxing Strips； 1x glove； 12x of post wax wipes,1x User's manual.

Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
corridor delay switch, delay energy-saving products.
Supply voltage: AC 220V power supply, Current: greater than 100mA.

Check Stock

KTNNKG 40amps WiFi Switch for Garden Light Pool Pump and Dust Collector,Support Remote Control,Compatible with Tuya APP,Neutral Wire Required,110V 220V ac

40A Wifi relay switch for power on / off only: max load 4400W for 110V or 8800W for 220V, 70% use recommended for safe(For example , the switch will....
KTNNKG WiFi timer switch can work with AC 90V - 250V: People use 110V in USA and 220V in EU,So you can connect hot line to the "L" port, and neutral....
Do not support device with 2 hot lines , make sure one hot line "In"/"out",one neutral line "In"/"out" only.(If your water heater has 2 hots with 115V....
For WiFi control, this 40amps smart switch must work with mesh router (or single 2.4GHz broadcast ).For example , you can connect it to your smart....
Main Function: APP control("TUYA" or "SMART LIFE").
remote control(battery not included,it works with 23A12V battery).

Check Stock

Power Converters 220v to 110v Step Down Transformer Voltage 3000w, No Noise, Ten Protection Functions, Suit for Air Fryer, Coffee Maker,for US Appliance Used in Europe

Notice——【3000W Step Down Transformer 220v to 110v】: This is suitable for using US appliances in Europe(220V), if you need to use 220V appliances in the US, you could search "ZHENGXI Step Up Transformer 110v to 220v ".
【Voltage Transformer】:As we all know, in most cases the power consumed by the appliance at the moment of power on is the largest, so when choosing a transformer, please refer to 1.25 times the power of the appliance you need to use to choose the right transformer. For safety reasons, it is recommended that appliances not exceeding 2400W be used to prevent damage to the transformer and the appliances used..
【Upgraded 220 to 110 Voltage Converter】：Unlike those large, bulky (stinky) converters, this newly designed 220V to 110V converter doesn't produce noise/smell/heat, it's quieter, more efficient, thinner, and it has suction cups on the bottom to make it safer. You can put it in your living room or on your kitchen countertop.
【Ten Protection Functions】:1.Overload protection.
4.Soft start function, no more tripping phenom....

Check Stock

Step Down Transformer 220v to 110v Voltage Converter 2000w , No Noise , Ten Protection Functions , Suit for Coffee Machines , Rice Cookers and Other US Appliances Used in Europe

Notice——【2000W Step Down Transformer 220v to 110v】: This is suitable for using US appliances in Europe(220V), if you need to use 220V appliances in the US, you could search “ZHENGXI Step Up Transformer 110v to 220v ”.
【Voltage Transformer】:As we all know, in most cases the power consumed by the appliance at the moment of power on is the largest, so when choosing a transformer, please refer to 1.25 times the power of the appliance you need to use to choose the right transformer.For safety reasons, it is recommended that appliances not exceeding 1600W be used to prevent damage to the transformer and the appliances used .Suit for coffee machines ， Hair Dryer , kettle , rice cooker , juicer and other appliances.
【Upgraded 220 to 110 Voltage Converter】：Unlike those large, bulky (stinky) converters, this newly designed 220V to 110V converter doesn’t produce noise/smell/heat, it’s quieter, more efficient, thinner, and it has suction cups on the bottom to make it safer. You can put it in your living room or on your kitchen countertop.
【Ten Protection Functions】:1.Overload protection.
4.Soft start function, no more tripping phenomenon.

Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....

Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....

Check Stock