Best 20sided Dies

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..

Check Stock

TEMCo Industrial Hydraulic Cable Lug Crimper TH0005 V2.0 (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

New for 2020, TH0005 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
16 Standard size dies for American Wire Gauge 10 through 600MCM. Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
16 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..

Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

...hreads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
Can cut materials such as cast iron, steel, aluminum, copper.
EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.

Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

... you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
Each compartment is labeled with sizing for simple identification.
PACKAGE CONTENTS: Combination set contains both metric taps and dies.
Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
(Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

Check Stock

TOMMARS 49-Piece Thread Chaser Set, UNC UNF & Metric Thread Restorer Tool Master Thread Rethreading Kit

Thread chaser set includes: UNC(silver): 5/8”-11, 9/16”-12, 1/2”-13, 7/16”-14, 3/8”-16, 5/16”-18, 1/4”-20.
UNF(black): 5/8”-18, 9/16”-18, 1/2”-20, 7/16”-20, 3/8”-24, 5/16”-24, 1/4”-28.
Metric(gold): M14*1.5, M12*1.75, M12*1.5, M12*1.25, M11*1.5, M10*1.5, M10*1.25, M10*1.0, M8*1.25, M6*1.0.
Special thread repair kit used for chasing worn and damaged threads and cleaning stubborn dirt and corrosion without shaving off metal..
A must-have master thread chaser kit for any auto mechanic for chasing threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and bodies of vehicles..
Thread chaser set is made of the highest quality carbon steel materials, with strong strength and maximum durability. The dies and taps pieces are hex shaped to use with a wrench or socket..
This master thread chaser set is comes with a storage case to keep everything organized. The taps and dies are color coded for easy identification, which helps you differentiate at a glance between coarse, fine, metric, and SAE chasers and dies..

Check Stock

Testament Of Youth

Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....

Check Stock

Temery Watch Press Set, Watch Back Case Closer, Watchmaker Watch Repair Tool Kit with 12pcs Fitting Dies

Coming with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch..
Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle..
Good for closing your snap back watch case after repairing job, not for crystal apart. Note: Before pressing the cover, make sure to use the correct fitting dies to avoid damaging the watch..
Equipped with a cleaning cloth for padding under your watch while press to protect your watch well..

Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..

Check Stock

Professional Watch Repair Tool Kit - 499pcs Watch Case Press Battery Replacement Watch Back Case Opener

▶【MULTI-FUNCTIONAL】These watch tools is perfect for very frequent tasks such as opening watch, watch strap adjustment ,spring bar pins removal, strap link pin removal and much more..
▶【CONVENIENT】Perfect for professional watchmakers,collectors. Come with a black nylon, the zipper box you can carry them anywhere. Durable,practical, convenient and very easy to use..
▶【SPRING BARS】The kit comes with 360 x steel spring bars(8-25mm, 20 pieces each size).It is great for easily fitting and removing spring bars and watch band lugs..
▶【PRESSING NYLON DIES】Allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm. And these exclusive straight wall nylon dies will not scratch or mar crystals..
▶【WHAT YOU GET】1 x 13 pcs watch repair kit, 1 x watch case closer, 12 nylon dies, 360 x spring bars, 1 x case opener screw. 24-Hour Friendly Customer Support. 30-Day Money Back Guarantee..

Check Stock