Best 200 Psi Gate Valve

HPDMC 6000psi Scuba Paintball Tank Refill Adapter Aluminium Alloy Fill Station

Scuba Refill Adapter with a 8mm quick disconnect..
Built for standard Scuba K-Valve, J-Valve and H-Valve..
Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
Made of high quality aluminium alloy, which is anti-rust and durable with gauge..
Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder.

✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..

Schieffer 1/4" x 200' 4800 PSI Thermoplastic Sewer Jetter Hose.
7250 PSI High Pressure Ball Valve 3/8" Female Connectors.
Erie Tools Button Nose and Rotating 1/4" Sewer Jetter Drain Cleaning Nozzle 4.5 Orifice.
Erie Tools 5000 PSI 3/8" x 200' Portable Hose Reel.
Raptor Blast Brass Hex Bushing 3/8" x 1/4" Reducer.

3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
IAPMO Listed to cUPC - "Lead-Free" Compliant.

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.

PEX elbow connections for easy installation without adaptors, reducing leak points.
Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
Can be tested using flush plug with air (200 psi) or water (300 psi).
Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.

This valve is used to prevent the back flow of fluids.
Maximum pressure rating 200 psi，200 WOG (water, Oil, gas).
This valve has a brass body with a stainless steel spring for long-lasting durability.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Scuba Refill Adapter with 36" quick disconnect filling whip hose..
Built for standard Scuba K-Valve, J-Valve and H-Valve..
Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
Made of high quality aluminium alloy, which is anti-rust and durable..
Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder..