Best 2 Cooled Chiller

SPDT Thread Paddle Type R3/4 Liquid Water Oil Flow Sensor Switch Automatic Control 15A 250V HFS-20

  • Extensive Use ---This flow switch is an automatic element that controls flow in pipes, which can be used on water treatment system, central air-conditioning, water cooled chiller and relative industries.
  • Subject Range --- Applicable fluid includes water, ethylene glycol, oil or other liquid not classified as hazardous or corrosive and air.
  • Good Performance --- Flow control value is adjustable, repeat action point is stable.
  • Automatic Control --- When flow rate exceeds set value, fluid drives blade and micro switch, the SPDT contact can connect a circuit and disconnect other circuit.
  • Good Durability --- Protection grade is IP54.
  • the contactor life is up to 100,000 times.
Check Stock

YUEWO 26 ft Copper Immersion Wort Chiller Coil Homebrew for Beer Brewing with Vinyl Tubing Garden Hose Fitting

  • High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
  • High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
  • Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
  • Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
  • Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..
Check Stock

Dive Travel - Curaçao

  • The CW-5200DH chiller uses standard R410a refrigerant to keep the laser cutting engraver up to 150W during use.
  • its maximum flow is 3.43gpm/h and 0.81hp compressor can cool up to 5596Btu per hour..
  • The 1.6-gallon (6L) tank features a closed design to reduce evaporation and provide long service between fills.
  • a clear viewing window lets you know when it's time to finish..
  • A variety of temperature control modes: dual temperature control mode, constant temperature mode, intelligent mode. The set temperature maintains an accuracy of ±0.3°C, and can also change with the change of room temperature to avoid condensation on the cooled parts in high temperature conditions or in summer..
  • Cloudray brand water cooler inlet and outlet ports are made of premium brass for long-term corrosion-free performance.
  • their careful design prevents any issues with leaks as it operates..
  • The Cloudray brand has a large-scale and standardized production line, and self-produces better control components such as sheet metal evaporators and condensers, with a low failure rate..
Check Stock

Dbgogo Counterflow Wort Chiller, 32.8’ Homebrew Stainless Steel Heat Exchanger Hot Liquid Accelerated Cooler for Brewing Kettle Mash Tun

  • High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
  • High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
  • Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
  • Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
  • Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..
Check Stock

TableCraft Deviled Egg Chiller Tray

  • Deviled Egg Chiller Tray, Polystyrene & Stainless Steel, 17 x 11.75 x 2.25".
  • TableCraft's Deviled Egg Chiller Tray features a lid/base combo that can be used to cover and keep fresh during storage or transit while it can also be filled with ice and used as a chiller base to keep your food crisp and cold and ready to serve.
  • Durable Polystyrene and Stainless Steel construction is lightweight and easy to clean.
Check Stock

Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5\ x 1.97\)

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

NutriChef 12 Bottle Thermoelectric Wine Cooler / Chiller | Counter Top Red And White Wine Cellar | FreeStanding Refrigerator, Quiet Operation Fridge | Stainless Steel

  • STORE AND SERVE YOUR WINES LIKE A PRO: Chill your favourite red or white wines to perfection inside this efficient wine chiller/beverage cooler. Equipped with a high precision thermo-electric cooling technology, adjustable temperature control, integrated LED lights and built-in circulation fan and ventilation grill, this electric cooler is a must-have for any serious wine enthusiast or aspiring sommelier..
  • LIGHT UP ANY ROOM DÉCOR: Boasting a sleek appearance with an elegant, reinforced glass door with air-tight seal, this electric wine refrigerator will offer an unparalleled style to your living room, office or home kitchen. With a capacity of 12 bottles and a free-standing design, this refrigerator cabinet is ideal for use on the floor, table or under the counter..
  • KEEP ALL THE COOLED AIR IN: Thanks to its efficient, touch screen control, you no longer have to open the door in order to change the settings in your wine cellar. Turn the LED lights on or off and adjust the temperature (Celsius and Fahrenheit selectable) at a simple touch of a button, without letting all that chilled air out..
  • ULTRA-QUIET COOLING SYSTEM: Equipped with an advanced cooling system that will keep your beverages at the right temperature without making a noise, this wine chi....
Check Stock

Frostte CO2 Glass Froster Instant Drink Chiller for Bar Restaurant Kitchen Silver

  • Frostte Glass Chiller – CO2 Glass Froster for Cups and Glasses – Instant Drink Chiller for Cocktail, Beer, Mixed Drinks, Wine – Glass Chiller for Bar, Restaurant, Kitchen.
  • Instant Led Light Glass Chiller-Portable CO2 Glass Froster.
  • APPLICATIONS FOR GLASS COOLER: Wine shops liquor stores ect, Club, Bar Glass Chiller, Restaurant, Office, Home, Parties, Events, etc. where a glass chiller is needed, and of course you can also use it at home or for parties, the LED blue light when mixed with the mist generated by the dry ice..
  • WHAT IS IN THE PACKAGE: 1x Glass Chiller and 1x Semisphere 1x Rubber Sealing Rings 1x User Manual (CO2 Tank not included).
Check Stock

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock