Best 2 4inch Tft Lcd Touch

sb components 3.2\ TFT LCD Transparent Case for Raspberry Pi 2 and Raspberry Pi 3 (Black)

This is a no-nonsense protective case for 3.2" TFT LCD for Raspberry Pi 3 Model B.
The case is a three-piece injection-moulded ABS enclosure that snaps together around 3.2" TFT LCD and Raspberry Pi 2.
It provides the best available protection/accessibility for 3.2" TFT LCD and Raspberry Pi 2 Model B.
Wall Mountable. Access to all Pi 2 consumer ports..

ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..

1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
with a capacitive touch panel. Supports 5-point touch..
3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..

【NOTICE BOARD】:We only installed the not activated windows 10 pro version and not activated pos software.
【POS SYSTEM 】 : Intel Celeron K1900 Dual Core 2.4GHz / 64G SSD / 4GB RAM / 15” 5-Wire Resistive TFT LCD Touch Screen（Main Display）/ 15'' TFT LCD(Customer Display)..
【PROFESSIONAL THERMAL PRINTER】: 80mm Thermal Receipt Printer , Auto Full or Half Cut, Support logo printing.
【STELL HEAVY DUTY RJ45 CASH DRAWER】 :Spring-loaded steel bill clips,5-coin compartments,3-position lock,RJ11 Crystal phone jack, quality guaranteed steel..
【EXTRA BONUS FREE OF CHARGE 】: life long after sale service, High quality cash register thermal paper X 10 Rolls, Keyboard X 1 Piece, Mouse X 1 Piece..

Support system: WinXP, Vista32/64 Win7&Win8 32/64 and Mac OS X 10.6.19 or above.

❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen..
❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk..
❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port..
❤【Firmware Update】 TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated..
❤【Quality Warranty 】TFT35 E3 V3.0.1 touch screen is designed and....

4 GB capacity for about 4,000 songs, 80,000 photos, or seven full-length movies with 2.8 Inch TFT LCD display.
Enjoy about 16 hours of audio, 4 hours of video, or 6 hours Web browsing on a single charge.
2.8-inch, 16-million-color TFT touchscreen LCD with QVGA 320 x 240 pixel resolution.
Support for MP3, WMA, WAV, AAC, OGG Vorbis, FLAC, and AC3 audio formats.
MPEG-4, H.264, WMV/VC1, Motion JPEG, and MPEG-2 video codecs.