Best 2 0 260k Tft Screen

SeaLife Micro 3.0 Pro Duo 5000 Set Underwater Camera & Dual Light Set for Photography and Video Easy Set-up Wireless Transfer Includes Travel case

  • CAMERA POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • BRIGHT LED LIGHT - 2500 lumens LED light using the latest COB LED array technology, 90 Color Rendering Index (CRI) that mimics natural daylight, 120 deg. wide beam angle evenly illuminates the subject with no hot spots, 60-minute run time at full power.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, compact design for easy handling, fully rubber-armored shock resistant body.
  • corrosion-proof anodized aluminum light head with fiber-reinforced polycarbonate body.
  • FEATURES – Camera: ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, WiFi, 64GB internal memory.
  • Light Head – 3 brightness levels, hidden emergency signal mode.
  • depth tested to 200 ft (60m), waterproof battery compartment.
Check Stock

Freeda Biotin 10000 mcg - Kosher Biotin 10000mcg Hair Skin and Nails Vitamins for Hair Growth - Biotin Pills Hair Growth Vitamins B7 - Superior Biotin Supplement Hair Vitamins for Women & Men (100 Ct)

  • TRIPLE-LAYER PROTECTION - The best protection for your 4. 7 inch iPhone 6S. Period! Constructed out of a "no stretch" soft TPU case + extra hard polycarbonate back plate + crystal clear HD TFT screen protector. Your iPhone will be protected from all angles..
  • 4 SILICONE SHOCK ABSORBERS - Say goodbye to the good old air cushion! Our unique silicone shock absorbing technology integrated into each corner of the case s maximum shock protection..
  • FRONT AND REAR PROTECTION - Don't expect any less! The beveled edge on the front of the iPhone 6 case provides a 0. 9 mm lip when laying on a table. The 4 raised edges with a maximum height of 0. 8 mm protect the back of the case.
  • EASY ACCESS PORTS - Ensures ultimate connectivity. Extra large openings allow easy access to all ports, buttons, and camera. Compatible with most battery chargers and earphone jacks..
  • INCLUDED AT NO EXTRA COST! THE ORIGINAL HD TFT SCREEN GUARD - This high quality screen protector ($10 value) provides full protection for your iPhone screen and is included at no extra cost! Fabricated from premium quality material made in Japan, the high-transparency HD TFT screen protector provides ultimate scratch and impact resistance..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

AKASO EK7000 Pro 4K Action Camera with Touch Screen EIS Adjustable View Angle Web Underwater Camera 40m Waterproof Camera Remote Control Sports Camera with Helmet Accessories Kit

  • POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • INTUITIVE SETUP - Easy setup with five Land & Sea scene modes, three built-in digital UW color correction filters (WB modes) and manual white balance to customize UW color correction to your specific depth and water conditions.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, so there is never a worry about flooding the camera.
  • compact design for easy handling and lightweight travel, fully rubber-armored shock resistant body.
  • individually depth tested to 200' (60 m).
  • FEATURES – Ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, "Piano Key" button controls for easy operation, WiFi, 64GB internal memory, time lapse shooting, upside-down shooting mode, works with SeaLife Micro 3+ app.
Check Stock

Hantek1832C Handeld 40kHz LCR Meter with Carry Case, 0.6Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz test frequency, 0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock

Hantek1833C Handeld 100kHz LCR Meter with Carry Case, 0.3/0.6 Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz/50kHz/75kHz/100kHz test frequency, 0.3/0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

BW 3.5 Inch TFT LCD Monitor for Car / Automobile

  • Brand New and High quality. Portable 3.5.
  • Wide view angle, low illumination. D/N models with photo-sensor. Distance reference marking display. Easy installation..
  • Screen Size: 3.5 inch. Ratio: 4:3 TFT screen. Power Supply: DC 12V..
  • Visible Area: 72mm x 53mm. Power Consumption: 2W. Operating Temperature: 0°C ~ +80°C. Storage Temperature: -10°C ~ +80°C..
  • Video: 2-channel video input. Dimensions: 93 x 80 x 20mm (LxWxH)..
Check Stock

AMOLED 2023 New HK8 Pro Max Ultra Smart Watch Men Series 8 49mm 2.12 Inch High Refresh Rtae AMOLED Screen NFC IWO Smartwatch Women Black

  • APP RDFit Compatible System (Compatible System) Android4.4 (inclusive) and above, IOS9.0 (inclusive) and above FLASH memory (FLASH memory) RAM: 192KB, ROM: 256KB Flash: 128M.
  • Type (Type) TFT Screen size (screen size) 2.16 inches Pixel (Resolution) 420*486 IPS Touch type (Type) full screen touch BT BT5.0.
  • NFC support Gravity sensor (G-Sensor) support.
  • Battery type (Type) lithium polymer Capacity 350mAh Charging Method Wireless Charging.
  • Waterproof level (Waterproof Level) IP68 Charging time (Charging time) about 3H Life time (Life time) about 5-7 days in use, 30 days in standby.
Check Stock