Best 16 1 Clutch

CTA Tools 8755 4 Pc. Clutch Head Bit Socket Set

  • Offering Clutch-Head Bit Sockets that are Notoriously Hard to Find Includes Four Clutch-Head Bit Sockets Designed for Use when Servicing Figure 8 Screws on Older Chevy Cars and Trucks Includes Sizes: 5/32, 3/16, 1/4, and 5/16 Inches Required for Use when Working with Headlight Buckets, Hood Braces, Steering Columns, and More.
  • Designed for servicing special fasteners found on older GM vehicles.
Check Stock

Iglobalbuy 50cc/ 80ccBicycle Engine Kit 2-Stroke Cycle Petrol Gas Motor Engine Kit for Motorized Bicycle 26\/28\ Bike (black) (80cc)

  • The 2-stroke petrol engine mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km..
  • This 50cc/80cc bicycle engine easy to install. The rider only needs some basic hardware skills, tools, and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation)..
  • Fits Most 26"&28'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • To start the 2-stroke engine, move the choke lever to "on" position, hold in clutch, pedal the bike to get some speed, and then release the clutch gradually..
  • To stop the 2-stroke engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.6. If you want to use your bicycle as a common bike, just disengage clutch, then press the silver button at the side of clutch, the motor will not be started..
Check Stock

Centrifugal Clutch Go Kart Clutch 3/4 Bore 10 Tooth for #40/41/420 Chain Fits for Mini Bike Go Kart predator 212 Lawnmower and Honda GC GX 2-6.5HP Engine

  • ★ Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower and fun kart, 3/4" Bore Designed for predator 212....
  • ★ Centrifugal Clutch Fits 2-6.5HP Small Engines HONDA GX120, GX140, GX160, GX200, GC160, GC190.
  • ★ Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands.
  • ★ Tooth: 10 Tooth sprocket for #40/41/420 chain (Chain included).
  • ★ Clutch Easy installation, a perfect replacement part for your mini bike and go kart. Package included: 1 x Centrifugal Clutch.
Check Stock

Large Purse And Wallet Set For Women Woman Ladies Purses With Wallet Sets Matching Tote Handbags

  • MATERIAL: Made of high quality synthetic leather and polyester lining with durable gold hardware. The stitching is well and runs smoothly and evenly, feels good to touch. Highly anti-scratch and tear-resistant, not easy to be out of shape..
  • Dimension Handbag:13''x10.2''x5''(W*H*D), Shoulder strap drop:10.8''. Wallet clutch:8.5''x4.7''x2''(W*H*D),wristlet strap length:7.6''.Cosmetic bag：8.5''x6.3''x2'', Total weight: About 1kg/2.2pound..
  • Handbag for women:1 main zipper compartment with 1 inner zipper pocket and 2 slot pockets.Wallet clutch:16 Card slots,1 ID window. 2 full-length compartments,1 pen loop and a large zippered pocket. This wallet easily holds 40 pieces of paper money, 16 cards and an iPhone 11 and passport, pen, checkbook.Cosmetic bag:1 main zipper compartment convenient for you to store all kinds of cosmetics..
  • Tote bag for women and matching wallet RFID Blocking credit card clutch set is perfect for dating,shopping,working,traveling, vocation, party and other occasions and keep your daily items well organized..
  • After-Sale Service: Qiyuer are committed to providing each customer with the highest standard of customer service and top quality goods, if you are not satisfied with our product or service for any reason, please feel free to cont....
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

285785 Clutch Assembly for Whirlpool Direct Drive Washing Machines by PartsBroz - Replaces AP3094537, 285331, 3351343, 3946794, 3951311, 62699, AH334641, EA334641, LP326, PS334641

  • ...rt works with several Whirlpool manufactured washing machines. Compatible brands include Whirlpool, Estate, Roper, and Kenmore/Sears. Refer to your owner’s manual or contact us to confirm compatibility with your model..
  • ✅ FIXES COMMON PROBLEMS: Are your clothes coming out of the washer soaking wet? Replacing the clutch assembly can fix washers that don’t spin properly and/or make lots of noise during operation..
  • ✅ EASY TO INSTALL: It takes one to two hours to remove a broken clutch assembly and install this new one. Helpful tools include a 7/16-inch socket with a long extension, pliers, channel locks, a flathead screwdriver, and a 1/2-inch nut driver..
  • ✅ HIGH-QUALITY DESIGN: Designed to last, the clutch assembly kit meets or exceeds all original manufacturer specifications for performance and fit. The part comes with 1 clutch assembly, 1 brake cam driver, 1 spring, 1 retaining ring, and 1 spacer bearing..
Check Stock

Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch for Minibike and Fun Kart, Compatible with Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight, Briggs and Stratton Tecumseh

  • 【Suit for】: 3/4″ Bore 12 Tooth Centrifugal Clutch with 4 Ft #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300±300 RPM..
  • 【Compatible with】: This Clutch kit is compatible with 22-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Also fit for Tecumseh and Briggs Stratton engines 2-6.5HP with 3/4″shaft. Common clutch for 3.5-7hp engines using #35 Chain..
  • 【Tips】: Also fits for most 5.5/6.5 HP clones, 4-7 motors in all brands and any other engines with 3/4 crank shaft and 3/16” key way..
  • 【Package including】:1 x Centrifugal Clutch, 1 x 4 Ft #35 Chain, 2 x Set Screws and 1 x Connecting Link..
  • 【100% Satisfaction After-Sales Service】:High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to ensure you are 100% satisfied!.
Check Stock

Pioneer TAT-5359 Clutch Alignment Tool

  • Universal alignment kit for centering of the clutch disc..
  • Suitable for a wide range of vehicles and some light commercial vehicles..
  • Screw action provides fast adjustment for required hub diameter..
  • 8 interchangeable spigot adaptors aid close alignment. Adaptors:0.47'', 0.55'', 0.59'', 0.63'', 0.67'', 0.7'', 0.75'', 0.78''(12, 14, 15, 16, 17, 18, 19, 20 mm) diameter..
  • 3 x expanding mandrels to align the clutch components. Diameters: 0.59''-0.75'', 0.78''-1.05'',0.9''-1.42'' (15 -19 mm, 20 -26.6 mm, 23 -36 mm).
Check Stock

ClutchMaxPRO Performance Stage 2 Clutch Kit with Flywheel Compatible with 1993-1997 Honda Civic Del Sol 1992-2005 Honda Civic 1.5L 1.6L 1.7L D15 D16 D17 (CP08022HDFW-ST2)

  • PREMIUM CLUTCH YOU CAN FEEL AND TRUST: ClutchMaxPRO is defining a new meaning of affordable performance clutch. It is simply the best bang and quality for the buck. Period. All ClutchMaxPRO products are designed, engineered, assembled, tested and inspected right here in the U.S.A. to ensure highest quality and satisfaction..
  • HORSEPOWER RATING AND TORQUE CAPACITY: 243 HP / 215 lb-ft, Suitable for daily driving, performance street driving and moderate track use..
  • KIT INCLUDES: Nodular HD Flywheel, Performance HD Pressure Plate, Performance HD Stage 2 Carbon Kevlar Infused Disc (8-1/4" x 7/8" x 20 spline), Release Bearing, Pilot Bearing, Alignment and Clutch Installation Guide.
  • LIMITED WARRANTY: All ClutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!.
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH: 1992 - 2005 Honda Civic (1.5L, 1.6L, 1.7L SOHC 4cyl D15, D16, D17), 1993 - 1995 Honda Civic Del Sol (1.5L, 1.6L SOHC 4cyl D15, D16).
Check Stock