Best 140mm Radiator Fanss

CORSAIR Crystal 460X Compact Mid-Tower Case, Red LED Fan, Tempered Glass - Black

Beautiful two-panel tempered glass displays every component of your build / clean, modern lines with an all steel exterior.
Compact Mid tower design fits full-sized ATX boards and multiple Graphics card configurations / direct Air flow access to the hottest components with No Drive cages in the way.
Capable liquid cooling support for both CPU and GPU loops / included AF140L and AF120L fans for excellent performance and Low noise levels.
Full dust filtration on bottom, front, and top / tons of cable-routing options and tie downs so cables can be easily tucked out of the way.
Tool-free Drive Installation for quick builds / front radiator compatibility for up to a single 360mm radiator or multiple 120/140mm radiators.
Compatible Corsair Liquid Coolers - H55, H60, H75, H80i, H90, H100i, H105, H110.

...ports AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket).
12 Separately Controlled RGB LEDs for unrivaled Lighting Control.
Patented Ring Plus RGB Software Enabled : Changes the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices.
280mm High Efficiency Radiator with Push/Pull Mounting Support.
Exclusive RGB LED Water block, which has 6 LED's and doubles to match the 12 LED from fans to offer same "Look".
Tt LCS Certified: Liquid Cooling Supported. Compatible with extreme liquid cooling configurationsDescriptionThermaltake Floe Dual Riing RGB 280 TT Premium Edition PWM TR4 LGA2066 Ready AIO Liquid Cooling System CPU Cooler CL-W167-PL14SW-A.
The Floe Riing RGB 280 TT Premium Edition is the worlds first 16.8 million colors liquid CPU cooler with two 140mm Riing Plus RGB fans and a LED waterblock. This cooler series features its extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that can be controlled by the patented TT RGB PLUS Software and AI interactive voice control. Functions within the softwa....

Super Tower Chassis : 16.8 Million-Color RGB-Imbued XL-ATX Tower.
3-Sided Glass Viewing Protection: Surrounded in 5mm Thick Tempered Glass Panels (Front and Both Sides) to Protect and Present.
Vertical Radiator View: Supporting Proper Placement for 120mm and 140mm Radiator Applications up to 480mm in Length.
Dual GPU Placement: 2-Way GPU Placement Allows Vertical GPU Mounting,I/O Port:USB 3.0 x 4, Type-C x 1,HD Audio x 1.
Fully Modular Design: Provides Multiple Configurations and Flexibility for Custom PC Enthusiasts.

DeepCool CK560 WH PC case was designed following the latest PC component requirements to create an high-airflow gaming case without being too bulky which widely supports motherboards E-ATX, ATX, Micro-ATX and Mini-ITX.
CK560 WH features cross pattern on the front panel to maximize ventilation in the gaming case, quick-release design makes the front panel can be easily removed from the case and mounted back to the position with the magnets and bottom hooks.
High-compatibility CK560 WH ATX gaming case is compatible with 360mm AIO radiator on front or 280mm radiator on top, meanwhile, maximum 175mm CPU air cooler height limitation offers more choices for mighty dual-tower cooler with 140mm fans like DeepCool Assassin III.
DeepCool CK560 WH PC case has an efficient cooling system thanks to the pre-installed three front ARGB fans and a 140mm rear non-ARGB fan which allows ample airflow, CK560 WH supports up to 6pcs 120mm or 5pcs 140mm fans to build High-airflow wind channel in the gaming case.
DeepCool CK560 WH gaming case maximize potential with flexible configurations of any system setup, which supports PSU up to 160mm and 380mm GPUs in length, meanwhile, an adjustable built-in GPU bracket provides extra support extra weight for graphics card to avoid sag.

4 mm TG 2 x 140 mm PWM Fan Full Tower Computer Case.
2x 140mm PWM Fan (front, 600-1200RPM) and 1x 120mm PWM fan (rear 600-1500 RPM),.
Top IO 4 steps (L M H PWM) fan controller to allow easy fan speed adjustment according to the.
Front (multi-way fan/radiator bracket): 1 X 360/280/240mm.

❤ STANDARD CASE FAN:140x140x25mm 140mm fan quiet silent 12v dc 0.38A cooling fan for the replacement of standard computer case fan ,gaming PC fan ,CPU cooler fan or other electronics equipment heat sink radiator.the fan's speed can be adjusted by using a different voltage (5-12V), it can work at a lower voltage to achieve a silent effect..
❤ 3-PIN CONNECTOR: 140mm 3 Pin connector fan for easy installation.4pin motherboard power port to suitable for more than 2 kinds of 140mm fan using..
❤ ANTI-VIBRATION SCREWS: Besides 4pcs normal screws there has extra 4pcs anti-vibration silicon screws packed together to reduce noise between fan and PC case..
❤ PACKAGE INCLUDED:140mm long life sleeve bearing case fan x 2 ,Silicone screws x 8, fan screws x 8..
❤ 100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose..

Iconic angular mesh front provides filtered airflow with a bold, stealth-inspired aesthetic.
Room for GPUs up to 360 mm with a 240 mm radiator in the top, or up to 360/280 mm front radiators with GPUs under 305 mm.
Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included).
Versatile and space-efficient ATX form-factor design offers the performance and capacity of much larger cases.
Open interior layout creates a smooth airflow path from front intake to rear exhaust.

Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material).
Water pump-reservoir combo: EK-XRES 140 Revo D5 PWM (incl. pump).
Compression fittings: EK-ACF Fitting 10/13mm (3/8” – 1/2”) – G1/4 Nickel (6 pcs).
Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs).

Iconic angular mesh front provides filtered airflow with a bold, stealth-inspired aesthetic.
Room for GPUs up to 360 mm with a 240 mm radiator in the top, or up to 360/280 mm front radiators with GPUs under 305 mm.
Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included).
Versatile and space-efficient ATX form-factor design offers the performance and capacity of much larger cases.
Open interior layout creates a smooth airflow path from front intake to rear exhaust.