Best 10mm Hammer Drills

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

REETAI-FOUR 10Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • 10pcs Concrete Hole Saw Kit-5 PCS 2-61/64"Hole Opener size:1-3/16"(30mm), 1-19/32"(40mm),2-9/16"(65mm),3-5/32"(80mm), 3-15/16"(100mm).
  • 2PCS SDS connecting rod: M22 SDS plus 11-3/4"(300mm), M22 SDS max 11-3/4"(300mm).
  • 2 PCS 8mm center drill bit 4-1/3"(110mm) ,1pc open end wrench 5/16”*13/32”..
  • High Quality Material-This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness,durable and works under rough conditions,but also super safe to use and simple..
  • Easy to Use-The masonry wall cutter bit kit fits SDS plus hammer drills(Bosch, DeWalt, Hiltex, Makita, Goplus, and more) to make your hammer drill even more useful.
  • Wide application-Prefect used for Brick, concrete, cement, stone, mixed brick wall, foam wall and installation of air-conditioner..
  • Sales service-If you have any question about product, please feel free to contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

DEWALT SDS Max to SDS+ Adapter DW5891

  • 4-in-ONE: This ZELCAN drill bit set provides a 4.4" pilot drill and three diameters of hole saws (30 mm or 1.2 in., 50 mm or 2 in., 65 mm or 2.6 in.)....
  • FITS SDS PLUS HAMMER DRILLS: The custom shank on the connecting rod works with SDS Plus tools by all major manufacturers (Bosch, DeWalt, Hiltex,....
  • DURABLE MATERIALS: Made of high-quality 40Cr steel and tungsten alloy, this hole saw drill bit set will give you years of service even under punishing....
  • WIDE APPLICATION: This masonry hole saw kit easily drills through most common wall materials (brick, adobe, concrete, cement, and stone) to let you....
  • SATISFACTION GUARANTEED: We offer ZELCAN's usual strong warranty and friendly 24/7 customer service so you can order worry free and start improving....
Check Stock

COMOWARE Rotary Hammer Drill Bits Set & Chisels- SDS PLUS Concrete Masonry Hole Tool 17pcs with Storage Case

  • PROFESSIONAL AND WIDELY USE: Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs..
  • HIGH QUALITY CARBIDE MATERIAL: It is featured in a harder YG8 Carbide tip and carbide steel body. The robust head is ideal for high impact applications. It allows for precise starts in materials such as reinforced concrete..
  • UNIVERSAL CONNECTION DESIGH: The SDS – PLUS shank is suitable for most rotary hammer drills on the market and meets most of your needs. SDS chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove..
  • MULTIFUNCTIONAL USING: The bit set includes 13pcs drill bits with 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 9/16″, 5/8″, 1 Point Chisel, 2 Flat Chisel and 1 U-groove Chisel..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a plastic index case, convenient to use and carry..
Check Stock

Yakamoz 1.5-13mm Quick Change 1/4-Inch Hex Shank Drill Chuck Adatper with Key Convert Impact Driver and Wrench to Drill Attachment Tool

  • Note: The product can NOT be used counterclockwise ! It must be transferred hammer drill stalls when use the hammer chuck, other stalls will lead chuck broken..
  • Constructed from premium chrome vanadium steel. Capacity Range: 1.5 - 13mm/ 1/16" - 1/2", Mount: 1/2"-24UNF..
  • Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16" to 1/2" shank.
  • Versatile use on impact drills and electric power driver to quickly switch tasks and keep the job moving.
Check Stock

6MM Diamond Hole Saw Tile Drill Bits Tool for Glass Slate Porcelain Marble

  • Set of 10 pieces, hole size is 6mm(1/4").
  • Diamond hole saw tile ceramic glass porcelain marble drill..
  • Always use lubrication (water), if not the diamond core will over heat amd blunt..
  • Use for conventional power drills on the low speed setting with the hammer action disabled..
  • These are auiable for drilling ceramic tiles, glass, marble, slate and porcelain tiles up to hardness grade 5..
Check Stock

SHALL 222-Piece Pink Drill Driver and Home Tool Set, 12V Electric Drill Combo Kit, 3/8" Keyless Chuck, 12" Wide Mouth Open Tool Bag, for Drilling Wood/Metal, Women DIY Projects

  • What Included: 12V pink drill, integrated extension rod, 8pcs HSS drill bits, 32pcs 25mm screwdriver bits, 2.0 ah Li-ion battery, 1.5 hour fast charger, 12" storage bag, 8" water pump plier, 6" slip-joint plier, 6" needle nose plier, 8" adjustable wrench, 6" mini hack saw & 5 saw blades, 8oz fiberglass claw hammer, 8" household scissor, 9" magnetic torpedo level, 10ft self-locking tape measure, 0.7" (18mm) utility knife & 10 blades, 50 cable zip ties, 5 spring clamps, 100pcs screws assortments.
  • 18+1 Clutch & 2 Variable Speeds: Max torque is 221inlb/25Nm, 25% powerful than other 12V cordless brush motor drills. Flexible, adjust the torque level for different types of project (1-4: driving small screws, 5-9: driving screws into soft material, 10-13: driving screws into hard material, 14-16: driving screws into hard wood, 17-18: driving larger screws, +1: for heavy drilling), two speeds are easy to set for driving at low speeds (0 – 350 RPM) or high speeds ( 0 – 1,350 RPM).
  • 2.0 Ah Li-ion Battery: Larger capacity compared with other 12V cordless drills’ 1.5Ah battery, offering more working time and reducing charging frequency. Battery can be fully charged within 1.5 hours and load working times is 70mins. Safe and reliable, continuously charged for 2....
Check Stock

Bestgle 1.5-13mm Capacity Drill Chuck, 1/2-20UNF Mount Impact Driver Bits Chuck Conversion 1/4" Hex Shank Quick Connect Change Adapter Converter with Chuck Key

  • Made from premium chrome vanadium steel, Impact drill chuck Capacity: 0.06-0.5 inch/1.5-13mm.
  • Classic keyed 3-Jaw design securely holds a wide range of twist drills and step drill bits with 1/16" to 1/2" shank..
  • Chuck adaptor with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • Versatile use on impact drills and electric power driver to quickly switch tasks and keep the job moving..
  • Note: The product can NOT be used counterclockwise ! It must be transferred hammer drill stalls when use the hammer chuck, other stalls will lead chuck broken!.
Check Stock

Sabre Tools 5/8\ SDS Plus Ground Rod Driver Bit for use with Rotary Hammer (5/8\ Ground Rod Driver)

  • 3/8" x 10” x 12" SDS Plus Drill Bit (Version 2) – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock