Best 1 cylinder

YOTOO 2-Piece Engine Cylinder Hone Set Deglazer Adjustable 1-1/4\ to 3-1/2\ and 3/4\ to 2-1/2\ Diameter with Stones 220 Grit

  • Engine cylinder hone for deglazing engine cylinders 3/4" to 2-1/2" and 1-1/4"-3-1/2" in diameter. 2-Piece Packed.
  • Flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • 1-1/4" to 3-1/2" cylinder hone features 3 replaceable 2-Inch long 220 grit stones. 3/4" to 2-1/2" cylinder hone features 3 replaceable 1-1/8-Inch long 220 grit stones.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

BTSHUB Tu-21 Cylinder Leak Down Tester Kit Dual Pressure Gauges Gasoline Engine Leakage Detector with 10 12 14mm Spark Plugs

  • The cylinder leakage test gauge Kit is designed to detect common engine faults including: worn piston rings, worn valves, cracks in cylinder walls and....
  • Available with either single gauge shows % of cylinder leakage, or twin gauge manifold show cylinder leakage and cylinder pressure. Suitable for any....
  • Dual pressure gauges: 1 Cylinder pressure gauge, 1 Cylinder leakage gauge. Features a 19" long rubber nylon resin hose with quick coupler on the....
  • 3 sizes adapters: Brass coated aluminum adapters, 14mm(fixed on a 10" long hose), aluminum 12mm and 10mm (both can be connected to 14mm adapter), help....
  • Ideal for testing trucks & late model cars where clearance is minimal. Please note: This cylinder leak tester is not suitable for shallow cylinder..
Check Stock

YOTOO 3-Piece Engine Cylinder Hone Adjustable Deglazer Set for Grinding Holes from Minium 3/4\ to Maximum 7\ in Diameter with 220 Grit Stones

  • This YOTOO engine cylinder hone set has 3-Piece different sizes are packed for widely use. It can deglaze engine cylinder holes from minumium 3/4" to maximum 7" in diameter.
  • Durable flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Includes: 1pc 2"-7" Diameter cylinder hone tool with 3-Piece 4" Long Stones 220 grit.
  • 1pc 1-1/4" to 3-1/2" Diameter cylinder hone tool with 3-Piece 2" Long Stones 220 Grit.
  • 1pc 3/4" to 2-1/2" Diameter cylinder hone tool with 3-Piece 1-1/8" Long Stones 220 Grit.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

LEM Products 1606 5-Pound Stainless Steel Vertical Sausage Stuffer

  • Cylinder removes easily to fill and clean.
  • Hardened steel gears with a protective gear box.
  • Includes (Two) clamps to secure unit to counter top.
  • Approximate Dimensions: 15" (H) x 9 1/4" (W) x 6" (Deep).
  • Cylinder Dimensions: 8 1/4" (H) x 5 1/2" (Diameter).
Check Stock

12'' Dial Height Gage Black DIAL FACE Shockproof 8'' X 0.001'' Dial Height Gage

  • 【Compatibility】This cylinder honing tool has a wide range of applications, and meets or exceeds the original factory specifications, can be directly replaced to meet your various needs.Suitable for degreasing of engine cylinders with diameters of 3/4 in to 2‑1/2 in and 1‑1/4 in to 3‑1/2 in..
  • 【Adjustable】Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【Professional Tools】This cylinder honing tool has high accuracy and sensitivity,cylinderc Honing Tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【High Quality Materials】This cylinder honing tool are made of high-quality iron material,no rust, and high strength for maximum durability.Manufactured according to strict quality control standards, the improved design can extend the service life..
  • 【Production Guarantee】From the purchase of original materials to the factory inspection of products, inspections must be carried out at every....
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

Baldwin Estate 8031.102 Low Profile Traditional Single Cylinder Deadbolt in Oil Rubbed Bronzr

  • Traditional deadbolt, single cylinder with 5-pin keying cylinder, accommodates 1.625″ (1-5/8”) diameter cut-outs door prep.
  • Solid forged brass specially-designed reinforcing strike constructed of high-grade steel.
  • Low profile cylinder deadbolt for 1.625″ (1-5/8”) door prep features 0.5″ (1/2”) low profile cylinder projection.
  • Deadbolt case is formed of heavy gauged steel for strength.
  • most interior parts are made of solid brass.
  • Accommodates 1.75″ (1-3/4”) thick doors (conversion kits for 2″ and 2.25″ thick doors are sold separately, via Baldwin Customer service).
  • ANSI/BHMA A 156.13 Operational & Security Grade 1.
Check Stock

McAvory Storefront Door Commercial Mortise Lock Cylinder & Thumbturn Adams Rite Style Cam in Aluminum 1 Set

  • 1" Mortise Cylinder Sets Fit Adams Rite, Kawneer, Vistawall, & Most other Storefront Door Locksets.
  • Each Set Includes 1 Keyed Lock Cylinder & 2 Keys, 1 Thumbturn , Cylinder collars.
  • Standard 1-inch Length , Standard 1-5/32" Diameter Commercial Door Lock Mortise Cylinders.
  • For use with commercial Store Front Deadbolt, Hook Lock, and Deadlatch in Glass Doors with narrow aluminum Frame.
Check Stock