Best 0 61kv Cable

Antronix High Performance 8-Way Cable TV Splitter CMC2008U OTA Coaxial 5-1002M

Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception..
Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards..
6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)..
3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports..
PTC Short-Circuit Protected UL Listed Adaptor – Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators..

【BT2.0 Connector】The Meteor65 1S whoop drone comes with BETAFPV exclusive designed BT2.0 connector, which can support 9A continuous current and....
【19500KV 0802SE Motor&31mm Props】Equipped with 0802 19500KV motor, the KV value is lower than racing version, which makes the flight time up to....
【F4 1S Frsky FC&C01O Camera】BETAFPV newest and lightest F4 1S brushless FC integrated 25mW VTX. It’s a perfect combo which has better....
【Meteor65 Frame】New marvellous design with 3.2g ultra lightweight. Compared to previous 65mm brushless frames, motor mounting position uses....
【Package】Meteor65 Comes with abundant accessories of 2 lipo batteries, BT2.0 charger & tester, extra props, 1 screwdriver, and the portable bag.....

Working Stability: annual change 003c 0.2%.
Impulse Voltage:5KV(peak value),1.2/50uS.
Load Capacity: 2 times current continuous.
Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
Isolation Resistance:20M Ohm(DC500V) or above.
Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

Working Stability: annual change 003c 0.2%.
Impulse Voltage:5KV(peak value),1.2/50uS.
Load Capacity: 2 times current continuous.
Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Isolation Resistance:20M Ohm(DC500V) or above.
Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

Terminates NM or SE Cables to a 3/4-in knockout.
For one 10/3 - 4/2 NM Cable, 0.52-in x 0.61-in by 0.51-in x 0.80-in Oval SE or 0.57-in - 0.69-in Round SE.
Also fits multiple two NM Cable configurations.
Zinc die-cast construction and tri-combo screws included.

Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception..
Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included..
6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports..
PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times..

Working Stability: annual change 003c 0.2%.
Impulse Voltage:5KV(peak value),1.2/50uS.
Load Capacity: 2 times current continuous.
Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Isolation Resistance:20M Ohm(DC500V) or above.
Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

SDI-OUT: This slot is where you connect the SDI display with sdi cable ..
DC IN: Plug the 5V-12V DC power supply into the unit..
HDMI IN: This slot is where you connect the HDMI source with HDMI cable..
ESD Protection Human body model: ±8kV (air-gap discharge), ±4kV (contact discharge).
Please note:Our device can not compatible the Blackmagic and SONY brand device.Do not support SD.

High Voltage Generator:Input Voltage: DC 6V to 12 V.
High Voltage Generator Cables: Output Cable Length: About 100mm.
Input Cable Length: About 100mm(Red is Positive).
High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency.
Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great.
Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc..